First off let me explain my background. I was given this jeep from my father that bought it from someone he knew. As I constantly took it mudding...
I need to know if there is a good website or online manual here that can tell me how to install a new clutch in my 258 1977 CJ-5. I went to the...
alright well i understand a relay is a must but can i use the probe to insert between the fins of the radiator to measure temp and then wire that...
After my previous post i have came to this. Hayden, Inc. 3647 Cooling Fan Control?? is this what i need to install to control my electric fan ( i...
Re: alittle coolant problem no never drilled any type of hole... i will defiinitely try that today and yes the hoses look partially collasped....
Re: alittle coolant problem well i didnt figure that letting the jeep idle for approx 4-5 min would need a fan to keep it from overheating....
just installed new 3 core heavy duty radiator with new hoses and using a pusher electric fan. Here it goes, i had the jeep idling making sure...
that is exactly what i am talking about in the picture. But i guess my threads are finally gone because it never gets tight. Just keeps spinning...
brand new motor mounts and transmission mount. Does anyone know what im talking about with the adjuster bolt?
So when i put the jeep in 4wd and try climbing a hill it seems the shifter for the 4wd hits the floor board ( on the side) I did put new bushings...
appreciate the feedback as i will be working on the jeep tomorrow to figure out my problem. As for the other tail light just not working any...
Here it goes... First my brake light only works on the right hand side ( already checked bulb and bulb is fine on left side) i can turn the lights...
here are the pictures from the 1977 CJ-5 I6 im not very sure which transmission i have maybe T15 but anyways i need the best advice on changing...
I have the I6 1977 Cj5 and i am not sure where the temperature probe needs to be plugged into the block.
I have fixed the tranny i appreciate you being interested. It was just stuck between gears so therefore i just pulled the top plate off and move...
I was cruising off road when the shifter come out of the transmission!! I took the plate off from the shifter and noticed the bowl like object...
I have a 4 inch spring over on my CJ-5 and i need new shocks. I have tweaked the jeep where one side was in the fender and one was on the ground...
I just did a spring over on my 1977 CJ-5 and now the shocks i have on it are bottomed out. I was wondering what inch shock or however you go about...
MAN!!! this has been a great headache for me. I hope its not really this hard to convert from manual to power. I need some help on what exactly...
Separate names with a comma.