Well, ran across this. They make a cj-yj conversion and a spring over. I was thinking about the spring over. Any thoughts?...
I was just attempting to install an aluminum radiator aaaaand, it turns out that the return line for the radiator is too close to clear the fan....
Ok, so it's been a bit since I posted here. I lost track of this place after the site went down for a while...Anywho. I finished my 360 swap and...
Would a 76 after market harness work for my 72?
Anybody have any experience with this kind of thing? I know the canvas tops are pretty popular with the FJ40 crowd. I'm looking for something...
Hey, so a while back I ended up swapping a 360 into my 72. I wanted to replace all the bolts I had taken out for the swap, but I sort of forgot...
So, I've been sort of toying with the idea of making my own wiring harness for a couple weeks now. My wiring looks pretty simple aside from the...
Looking for a source for some new bellhousing, motor mount bolts, ect. Anyone got any ideas? :?
Anyone got some tricks for putting the engine in? I can't seem to get the clutch to line up with the input shaft and the motor mounts at the same...
So I got the flywheel on the 360 with a new clutch and took off all the accessories and whatnot. I tried putting it in myself today but it's...
I can't find the specs on a NAPA built AMC 360 crate engine for the life of me. I even called the NAPA in Carson city where the dude bought the...
So I called a machine shop to see if I could get my 304 flywheel balanced to match the 360 flex plate...They say not possible, since the 304 is...
Ok, so I snagged a 360 from a dude locally...Finally. It was apparently a NAPA crate motor, came out of a 79 waggy that was rolled. My question is...
Hey, just out of curiosity would it be possible to use a 71 CJ5 (Buick 225) bellhousing on an intermediate CJ5 to swap a ch*vy in? Also if it...
Of a 360 conversion on a 304 jeep? I have a 72, which stock pushes 150 hp and 245 tq. I don't really get what the big deal about the 360 is, I...
Ok so, I was reading in the tech archive about the YJ spring conversion and I'm a little confused. Although the article was informative it does...
So I took a break from building the frame today to try and sort out the problems with the 304. I looked at the carb (pwr valve,float lvl, et) and...
So I read on Pirate that a CJ 30 is (aside from the ring gear) basically the same as a Dana 44. If true, this would more or less make it...
So I am toying with the idea of swapping out my steel tub for a Kevlar one in the area. I think it's make by Shell Valley? Don't quote me on that....
This is my first jeep so I'm no expert. I'm gettin quite a bit of black smoke at WOT, I tried a few things already but I thought I'd ask around...
Separate names with a comma.