1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Source for odds and ends?

Discussion in 'Intermediate CJ-5/6/7/8' started by ReLoaded, Jan 31, 2009.

  1. Jan 31, 2009
    ReLoaded

    ReLoaded Professional Drunkard

    Santa Ynez, CA
    Joined:
    May 24, 2008
    Messages:
    94
    Looking for a source for some new bellhousing, motor mount bolts, ect. Anyone got any ideas? :?
     
    ReLoaded, Jan 31, 2009
    #1
  2. Jan 31, 2009
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    You have a Fastenal near you?
     
    timgr, Jan 31, 2009
    #2
  3. Jan 31, 2009
    ReLoaded

    ReLoaded Professional Drunkard

    Santa Ynez, CA
    Joined:
    May 24, 2008
    Messages:
    94
    Yea, actually I do! Santa Maria, not too far away. Are they going to know what I'm talking about? Or will I need a part number?
     
    ReLoaded, Jan 31, 2009
    #3
  4. Jan 31, 2009
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Even in the day, you wouldn't buy generic hardware through the Jeep dealer - it would cost too much. The parts book will list it, but you'd only buy special hardware like head bolts and such through the parts department.

    Hardware is hardware ... You can go to Fastenal and say "I need 6 grade 5 3/8"-18 cap screws 2.25" in length" and they'll know exactly what you want. They won't have a clue about the application though.

    Tractor Supply is said to be a good source too, or your local hardware store. My Napa store has a pretty good stock of bolts, including a wide variety of studs. Lots of places might have what you need.
     
    timgr, Jan 31, 2009
    #4
New Posts