1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Bellhousing frustration

Discussion in 'Intermediate CJ-5/6/7/8' started by ReLoaded, Mar 26, 2009.

  1. Mar 26, 2009
    ReLoaded

    ReLoaded Professional Drunkard

    Santa Ynez, CA
    Joined:
    May 24, 2008
    Messages:
    94
    Hey, so a while back I ended up swapping a 360 into my 72. I wanted to replace all the bolts I had taken out for the swap, but I sort of forgot what came from where...:oops:

    I went and got some grade 8 junk, which I thought was the right length but apparently not.

    Anyone got the specs on the bellhousing/starter bolts?
     
    ReLoaded, Mar 26, 2009
    #1
  2. Mar 26, 2009
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,524
    from the Jeep parts book.
    bellhousing to engine: 1974-1976
    qty 4 - 3/8"-16 x 1-5/8"
    qty 2 - 7/16"-14 x 2-3/4"
    depending on the year of bellhousing, you might also use:
    qty 3- 3/8"-16 x 2-3/16"

    starter bolts just given as 1-1/2" long; no diameter, but maybe you can figure that out.
     
    jpflat2a, Mar 26, 2009
    #2
  3. Mar 26, 2009
    ReLoaded

    ReLoaded Professional Drunkard

    Santa Ynez, CA
    Joined:
    May 24, 2008
    Messages:
    94
    Hah! thanks man!

    Looks like I'm getting myself one of those parts books too haha
     
    ReLoaded, Mar 26, 2009
    #3
New Posts