Ok, so heres the whole story: My jeep, (56 cj5 f134 carter), has started and run flawlessly for well over a year. Despite anything else that may...
Well I got brave this spring and took my 56 out for the first time, and my "I'm not going to abuse it" plan didn't really work out, so......I get...
Ok, so after getting everything put back together last summer, (head job, valve adjustment, botched exhaust, ignition system, timing, etc....), I...
Does anyone have any suggestions as to where I can find a good exhaust system for a 56 cj with an f134? I know that there are a couple places...
Ok, so I lost my key to my 56 cj5. It has an aftermarket wiring kit with a fuse box for all the accessories, (guages, 1 windshield wiper). I was...
I seem to have developed a problem where the jeep will stall, unpredictably, and randomly. It will go fine for weeks or at least days at a time...
So I got brave yesterday and put 140 miles on the jeep in 90+ degree heat. The only problem I ran into were: 1.vapor lock, every time I shut the...
Anyone available tonight in my area that could help me get my valves adjusted properly???? I'll feed you and provide free beer if you could stop...
Ok, so I changed the head gasket....discovered while I had it apart that my valves were leaking....cleaned and lapped the valves....had a bent...
While taking everything apart for my head gasket replacement I noticed that one of my pushrods has a slight bow to it and is worn on the side...
Sorry about having so many threads that last so long, but I am very grateful for all the help everyone here has provided.......now: How do I...
My temp gauge doesn't work, so bear with me. The PO removed the thermostat. I put a 180* one in. I can see the coolant circulating in the top...
Ok, so for those of you following/responding to my posts, you are pretty clear on the saga of getting my jeep running satisfactorily. Now I need...
Ok....so when I got the jeep, they had it set idling at 1000 rpms, (it idled great there). I knew that wasn't right, so I adjusted it down and...
Well, I'm posting another question....After alot of looking around I have come to find that the IAT-4405 distributor that I have was not put on...
Sorry about having so many questions, but I can't seem to find anything about an f-head being set up like mine. The pic shows where the hose goes...
Ok, so now for another round of questions that I should already know the answers to: Does anyone have a picture of the cap and rotor used in a...
Ok, so the time for an oil change is approaching, and all this talk on the cj-3b page about different oil types has me wondering what to use. I...
Separate names with a comma.