pushrods.....F-134

While taking everything apart for my head gasket replacement I noticed that one of my pushrods has a slight bow to it and is worn on the side where it is contacting the head, (probably the tapping noise I was hearing while it was running..) Question is:

Can I just replace one/all pushrods and be ok, or do I have to do lifters and rocker arms as well? Also; This is my Daily Driver, so can I run it with what it has while I am waiting for parts?

 

Should be ok to replace just the push rods I think. But you should use a "set" of push rods or take them all to a machine shop to have all four balanced. And I wouldn't drive it so you don't risk breaking the rod through the side of your engine block. Of course you'll need to replace the rod bearings at the same time too.

 

rod bearings?

 

I would inspect all the push rods for wear.
I would replace only the ones that are bent or appear worn.
They are stout units.

 

Thanks guys, I have them on the way....