When first starting my jeep on the one side I have noticed some splatters of liquid on the ground below the exhaust, just thought is was some...
Hi Guys, looking to re-gear, currently have 3.73 with a 4-speed w/ granny low and running 35's. Was thinking of going to 4.88. I was quoted $900...
Hey guys what do you think, plenty of juice, no bad connections and when I turn the key no clicking etc. Bad solenoid?
I have recently twice tweaked my windshield via a tree, once pushed back and now once pulled forward. It doesn't look as though it was ever laid...
Is that permixed anti freeze 50/50 mix okay for the older CJ's with V8?
I have a spare dana 44 rear and I am taking all the good parts off of it to keep as spares. I have removed the 5 or so bolts which hold the inner...
I ust got some half doors for my 73 CJ5 and I see that I can buy the lower hinges, which mount to the body but the top hinge location would be...
had problems blowing a fuse which shut down my tach, temp, oil, gas and voltage gauges. Affixed the flopping around voltage regulator behind the...
When I have been wheeling and then head out onto the road I need to stop and unlock my front hubs in order to get the TC out of 4 lo. Its always...
I've been saving some money and have a number of things I would like to do and should do for the jeep. Just wondered what people thought is the...
I have a 73 CJ5 with warn lockout hubs. Internally there is a c-clip which holds the splined area together, in there is a washer, which I need,...
I have had to remove my spacer lug nuts a couple of times recently and find it a royal pain. I end up using two socket sets and work against each...
Does anybody know what the original exhaust was for a 73 CJ5 with 304 V8? Was it dual exhaust or single? I don't find it anywhere. thanks
Like the title says, I have broken my axel shaft on the dirvers side. I have removed the wheel and brake drumb. Now for the warn locking hub. I...
I keep blowing a fuse only when the engine gets real hot (like when trailing) for all my gauges, volts, engine temp, fuel, oil & battery. They...
I know a guy selling the above with new seals, new r&P, 4.10 gears, new carrier for the 30 wants $550obo. what do you think there worth? They...
I'm thinking of having a front disk brake conversion done on my 73 and was quoted about $650 to do it, does that sound resonable? I know parts...
noticed one of my brake lines as a small tare in it and to be honest they all look old. What is the general consenses on what to get the SS ones...
does anyone know the above? My socket sets biggest is 1-1/16" Need to remove the pinion yoke as I have developed a vibration in the rear and the...
I got a problem I decided to buy the Borgeson steering shaft to fit my 73 w/power steering. Got the steering shaft and it won't fit the diameter...
Separate names with a comma.