Thanks! R-
Thanks: All I have is a pix. Not sure if the bolt pattern will show!
Hi: I am looking to purchase a used bell housing. It came out of a 79 CJ 258 motor and a t-18A transmission. My jeep has a 258 with the A T-150....
Thanks for the info.
I have read a few notes on folks flushing their motors using ATF. My 79 CJ5 w/258 has a little ping on the top-end and I was told flushing the...
I plan on replacing the whole tank. I wanted to replace the factory type skid plate with a diamond plate type. Just trying to find out where I can...
Hello: I am looking for a diamond plate skid plate for my 79 cj5 gas tank(15 gallon). Warrior makes one for a cj7 Model# War904GTC. Will that...
Thanks. Is the clutch lever attched to the/part of the adjuster?
Hi; My 79 cj5 clutch is in need of an adjustment. I have to press the pedal pretty close to the floor. I would like to adjust the pedal. Does...
Thanx! r-
Getting ready to install a new fuel pump on my 79cj5 258. should I use and RTV or just the gasket? Thanx, R-
Thanks!!!! I will go with the gasket and the "Right stuff". I have tried it with a gsaket and with the blue RTV.... both times leaked! Third time...
Hi: I read a couple of threads from folks recommending fel-pro gaskets for a rear diif. I have the AMC 20 rear-end. Would anyone know where I...
Does the fuel line from the fuel pump to the filter have to be the hard line material or is there a stainless type flexible line I could use? This...
I would think the linkage is correct as it shifts normal when driving. Is there a way to tell if it is or not and is there a way to adjust?...
Thanks. So far it is only ocassionally when I am on the incline. R-
Hi: I have a 79CJ5 w/a T-150 3 speed Transmission. It was recently rebuilt along with the clutch and clutch linkage. The jeep shifts pretty...
I noticed a few links regarding exhaust manifolds. I am need of a new one for my 79 cj5 w/258. I noticed quite a few on the web with different...
Did you have to use a primer first??
Door side: Next to the seat on the floor. I purchased an adpater that that adds about 6" for the retractable belt section. The original belt was...
Separate names with a comma.