Ok I have got to know what color the paint is. That has got to be one of the best looking CJs I have ever seen.
I have always used the red silicon on the outside pad and never had an issue with rattles.
Are you painting bare metal or a painted surface? Putting lacquer over some paints will make it crack and bubble/turn loose. If it's painted try...
TexasWheels have you checked for vaccum leaks. The vaccum pump went out on mine and it ran like crap. The carb base gasket may have started leaking.
I use old axles to make hammer heads and pry bars.
Yes, many years ago. I was still in high school and dad told me if I fix the car(1962 belair) it was mine. I worked 3 weekends for him to pay for...
I just changed to disk on my 66. The old lines I removed were 13 inches end to end. I have no idea if they were original, but it still had the 9...
What he said. If you install it spring side in it can bend the disk and may not release. Don't ask how I know that.:D
Can you post a picture of the axle?
Put the puller on it and take a good bind on it. Then give the puller a good smack with a shop hammer. It should jump off, don't let it hit you....
No I was going to take pics but when I started I didn'tthink about it.
I pulled the carter today to try and fix it. The problem was I had no idea what was wrong with it. So I pulled it apart, laid all the parts out on...
Thanks for the link, I'll check it out. I have the complete Chevy car I can pull parts from. So the pump and related parts are not a problem....
It was just a thought, since I have the two barrel. I guess I will have to save some money and buy a decent carburetor. I wonder if I could rig...
Separate names with a comma.
