I had a 1971 with a 134 and a T90 that had that same shifter
As far as I can tell that is the fresh air hose that Walcks sells. The original had a cloth covering if I recall.
There is one for sale on ebay with some good pics...
I had the same problem once and it turned out the pickup tube was clogged.
I remove two of the head bolts on diagonal corners of the head, and then using longer bolts, bolt a chain to lift with there. I also find it...
I take the two halves of the rod apart, cut the threaded end shorter, and tap new threads.
In the southern PA area, I can't see that Jeep bringing much more than $500. ATVs are now much more popular than old jeeps as hunting vehicles and...
The worn needle bearings and shaft on the intermediate gear in my Dana 18 transfer case made that type of noise on deceleration and coasting.
I put a set of Bestop seats in my 1971 CJ. They seem to sit about an inch higher than the stock seats when mounted on the original brackets.
The post 1975 mirrors are what I would go with if I actually wanted to use them to see things behind me. The early type are useless as they are...
Unless the manifold gaskets are leaking, leaving the manifold alone is probably the best choice.
The later heads are shaped differently on the sealing surface with the valve cover and the covers wont interchange.
Re: Anybody see any cracks in this block?? Update to my headgasket replacement!! PHOT I would do some more cleaning on the head and block and...
I always tapped a chisel between the gear and bearing to push the bearing on down the shaft.
They make replacement parts to fix your front spring hangers....
Separate names with a comma.