Anyone on here from the Littlerock area??? Looking for a reliable shop to rebuild a carb. My days of working on the kitchen table have been ended...
I'm getting ready to start the repairs on my CJ and I was thinking of using body solder instead of bondo or fiberglass. I was wondering if anyone...
I did a tune up today on my 225. When I opened the box for the new rotor, I pulled the rotor out and got a surprise. In the box with the rotor...
The casting number on my engine is 991503. According to the Buick ID page that puts my engine between 76 and 74. How can I pin it down to the...
I have a length of stainless about 5 foot by 1.5 or 1.75 don't remember. I want to do a 1 piece rod on my 73 D30. Would Stainless work or is it to...
:v6:Steering is a nightmare. I don't know if my CJ was raised by a PO or not. Don't know how many leafs should be in my springs. I do know the...
I'm still in the process of reading through all the info on the steering swap. Any idea if the steering box from a 1982 Chevy Scottsdale will work...
:)Right now, I have a D30 3.73 front axel on my 62 CJ5. What other axels would bolt up with disc brakes and little to no modification?
I just found a 74 CJ5 for 1500.00. I dont\'t know anything about it except for an in-line 6. What are the stock axels and engine. I wan't to know...
:) Okay, i've read the tech section and i've read a million different posts. I have to ask because I can't find a firm answer. The parts list in...
I'm sure it's in here somewhere and i'm missing it, I don't have a FSM just yet, only the Jeep Owners Bible. What is the torque for a 7/8"...
:) What kind of headaches am I looking at in pulling the ross steering box with the body and engine still in place?
:) From what I have been able to determine, using various links from this site, is that I have a D44 rear axel. If you can help identify these...
:? Any ideas as to why there is a wire running to my steering box. I've gone through my Haynes book and this forum and i'm not seeing this...
:) Between branches of right exhaust manifold, I have this stamped (PH 1). If I am reading correctly, P-1968 and H-V6-225 9.0 to 1 C.R. (2bbl...
:) I was looking at parts for my bellcrank. There are different size bellcranks. I didn't know this. How do I tell what I have so I can order the...
:) I seached for a thread on dimmer switches and it asked if I meant dinner switch. (LOL)I I have three posts on the back of my dimmer switch....
I tried searching and I can find where people are talking about having rebuilt the steering box. What I can't find is all the parts involved in...
Since the entire headlight harness is less than six foot long from the terminal block mounted to the inside of the fender of my 62 CJ5, am I...
:? First, does anybody know where I can get a reproduction aluminum vin plate for under the hood. Now that I have found the correct vin, I would...
Separate names with a comma.