I'm jealous!
I wanted to show off a few pictures. I have been working on this for about two years. This is my first and I can't wait for my second....
Great minds think alike. I too have been thinking about a shallow attachment to my skid plate. Back to the drawing board!!!
('57 CJ5) I have been working on this jeep now a couple years off and on. It is just how I wanted it too look. The only problem I have are the...
Re: Carb woo's part II This seems to be the general consensus. Points, plugs, condenser, rotor and cap. Thanks!:)
Well I'm running out of options so I'll try that. Thanks.
I pulled the distributor cap off, couldn't find anything out of the ordinary. I tried to pull the rotor off, I think I bent the metal tab (don't...
When you say "Pertronix unit", what exactly was it that you bought? Just the points, the whole distributor, the rotor or what?? My jeep is a "57...
(57" CJ5) My jeep runs no longer. The fuel tank to the pump to the carb is clear and working. Fuel is getting to the carb with no problem. I...
I pulled the fuel pump and checked the line between the gas tank and the pump. I'm also installing a fuel filter in there. Next I'll check the...
Everything was fine a few weeks ago. I took the jeep out recently and after a few miles it just sputtered a couple times, I gave it a little gas...
Windshield wipers? WINDSHIELD WIPERS? We don't have no stinkin' windshield wipers!! I think I'll just keep the screw in the other end. Thanks. -G
("57 CJ-5) I'm having carb problems. I'm working through it one part at a time. I pulled the fuel pump, one line comes from the fuel tank the...
Points huh? Need to check it out, thanks. -G
Re: Carb woo's Thanks for the info. I tried to download a picture but something isn't working right. I have two screws. Facing straight down I...
(57' CJ-5) I am driving along in my jeep. All of a sudden it starts konking out on me. I start it, it does 20 feet or so and it back fires a...
Put a box cutter (knife) in there along with a pencil and a flashlight, a small maglight will do fine. Also, some post-it type of paper. That...
Thanks guys. This was what I was looking for. I remember the thread but couldn't remember when. -G:)
('57 M38a1) I am in the process of painting my jeep. I got the sand paper, paint rollers and thinner. I took the hood off because that is what...
You're right it is semi-gloss. I'm going for the flat OD. Also, the paint is very thick. I think I'm going to bring it in and have it blasted.
Separate names with a comma.