I replaced the springs on my 2A with a 1" lift kit. Everything fit fine, except the front end was lower than the rear. I called the supplier who...
Herm the Overdrive Guy lists a cable for the FC to act as the shift mechanism for the Warn Overdrive. Has anyone used one of these or seen one?...
Where can I find the body armor, rear corners, cross piece that runs under the tailgate, and side plates for a CJ3A? I can find corners, but that...
I have an after market clutch cross shaft on my 3A. The clutch pedal doesn't have as much overall travel as one would expect, i.e. the clutch is...
I have a CJ5, 1963, with a Model 44 rear differential and power lok. I am looking for clutches for it. Are these the standard 44 clutches or are...
I have the Kaiser Supersonic in my 2A and running, just in the chassis. That has worked out fine. I didn't have a carburetor and had an issue...
I am having a terrible time finding a distributor cap for my prestolite IAY 4401 distributor. The auto parts store has gotten me three different...
I have a Prestolite IAY- 4401 6 7 distributor in my CJ - F head. I have purchased two different distributor caps, and two different rotors. Both...
I have a L-134 Kaiser supersonic, late block with wide flange. I purchased a Solex carb for the L-head Willys, but found today that the intake...
I have a T-90 bolted to the transfer case sitting on the bench. It has oil in it and just sitting there on the bench it is leaking from what...
I put the flywheel back on a friends F-head. Without checking, I torqued the bolts to 40 ft lbs. All seems fine, however the more I thought...
I have a manual steering box from a 1980 CJ. I need a universal joint for the input shaft that has the matching female spline on it. Does anyone...
I have cylinder kits for all of my brake cylinders and the bores look good after honing. However the kits did not come with the little shots of...
About 2 years ago I purchased all of the components for Herms steering conversion kit. It was about 6 months before I finally got around to...
Is there something listed on the net or could someone tell me what matches with what? I have an L Head, six volt starter, that matches a bell...
I seeking information about the optional CJ5 / CJ3B Vented Windshield. Does anyone have one of these? Would you post some photos of the...
I rebuilt my transfer case / transmission and purchased a used Warn Overdrive to install prior to putting my Trans / Transfer back in the Jeep....
I am now engaged in a CJ2A project. I have the 60 portion of a 60 40 seat from a CJ5 from years past. I would like to use this, but of course...
Is the passengers seat for the CJ5 60 / 40 seat the standard bucket seat? Or did they us something like the narrow folding passengers seat like...
Currently on ebay, item 4636425937, are 15 x 8 Kelsey Hayes wheels. The seller mentions that these will not fit 11" brakes, however claims these...
Separate names with a comma.