Heated the oven to 500. 7 minutes later and a sharpt tap on the kitchen cutting board and the accelerater pump check ball was free. Thanks for...
Rochester 2G Accelerator Pump check ball UNSTUCK! Howdy all, Well I was putting a kit in the 2G and the d*&^ check ball under the accelerator...
Here's the deal. Got the CJ together. Original stock 225, definately OF. Installed the new HEI (also definately OF). First try was 180* out....
Okaleedokalee! The Brown Santa came and brought Dave his new Speedway motors steering u-joints and 3/4" shaft. Well the joints fit the Postal...
I took the tranny brake off. When I bought the Jeep it was slinging gear oil everywhere. :shock: I assumed that the rear seal was leaking. Well...
The CJ5 is ready for paint:) .....I plan on using Martin Senour Acrylic Enamel single stage. For those not familiar with my project I've...
Well its been raining down here so instead of finishing my sanding and priming I boxed in my frame rails and started my postal jeep saginaw...
I've been looking at posts about the saginaw conversion for my 70 cj. It seems that the postal jeep column is a good candidate to retain a stock...
Separate names with a comma.