Hey guys, I did a search on here and did find what I was looking for in a thread, but the few jeep part places I have contacted around here say...
OK guys, I have had many jeeps, scouts, and cruisers over the years but never a jeepster. I have found one for sale locally for $500 and wanted...
I was trying to figure out if an 8 lug swap is possible and what all might be required to get my closed knuckle 5 on 5.5 front D44 on my FC to 8...
Looking at a '80 CJ5 for sale and it has the iron duke 4 cyl. and garbage SR4 tranny and good D300 t-case. I was wanting to make sure I am right...
I have been looking at a jeep for sale locally. It is a '60 CJ5 with a nice looking windshield and a brand new bestop. I am wanting to know if the...
I have recently rebuilt the broken Dana 18 that was in my FC-170 and it all went together pretty good for the most part except one last little...
I was wondering the other day as I looked at a dana 18 laid on my shop floor next to a dana 20 I am going to install soon if you could swap the...
I have found a '72 commando for sale and it is supposed to have a 360/727/D300 in it. The seller says the tranny stopped pulling and he thinks...
Looking at what the owner says is a '74 CJ6 and he sent 2 pics of it to my email. The problem is- one is from a front angle and the other is from...
I have a '75 CJ6 that I am swapping from manual steering to power steering. I have a CJ power steering gear that I was going to use and just now...
My buddy gave me a V6 that he was told was a 225 from an early buick car. I took it in case I ever needed it for that "next project". I have...
I was wondering what all would have to be on hand when going from a standard short style dana 20 to a scout dana 300 from an '80 model scout (the...
Well I have a '63 FC-170 with a single lever remote shifter in the cab. I got it with the shift forks broken off in the front housing. I have...
I have always heard and read that the scout 258 is indeed the same as a jeep 258, both being AMC engines. I have recently purchased a '75 CJ6 with...
I have an old '63 FC-170 that I bought all complete and was told it ran and drove until "something about the transfer case broke". I got her home...
My dad's friend has a '55 CJ5 just rotting away behind his house with a factory clock about the same height and diameter as the speedo. It is gray...
I have an M-38 with a '71 CJ5 drive train swapped in. It therefore has an F head, T-90, and the large hole Dana 18. I called AA and they have an...
I have a CJ3A frame with a M38 body on it with all '71 CJ5 drive train. I tried to fit the rear gas tank from the '71 under the frame at the rear...
I have found a 68 CJ5 with a locked up F head in it and it looks to be in really good shape for $1,000 obo. The owner sent a couple of pics and a...
Just for the record, what is the difference between bolting a T-18 to a Dana 18 verses bolting a T-18 to Dana 20. I know the T-18 D20 package is...
Separate names with a comma.