If I'm not keeping the cab heater (Florida) can I plug the heater hose ports on the engine or do I need to connect them for flow?
I started surgery on my '59 by removing the body with a sawzall and hammer to see what I'm dealing with. the tub had more plywood and 2x4's than...
Will these 2 clear each other? I've looked at all the photos and it doesn't look like there is enough room for both. It also looks like the...
My fiberglass tub doesn't have the tool box and I doubt the aftermarket ones will fit, so I was thinking about making one since there is...
Are there any drawings of an early cj5 showing overall dimensions? Length, width, height, ride height, wheel base etc. thanks
Has anyone looked into having a rim "widened"? Stockton Wheel in CA. can take the center out of a stock wheel and weld it into a wider ring of...
I need to be edjucated on this. I plan on adding locking hubs to my '59 cj5 but, to ease my budget, want to buy them used. I've seen them on...
I finally did it. Some of you may remember me getting a free fiberglass body that the previous owner had cut in two. His plan was to stretch it...
The rusted out steal body ('59 cj5) I'm replacing with fiberglass is missing some much needed information. What do the 4 body mount holes on the...
I have a fiberglass body I'm planning of using but it doesn't have the detail under the tailgate for the body to clear the hitch mount....as seen...
Would the larger brakes from a late 40's Jeep truck fit in my '59 cj5? I have the truck and was thinking it would be a cheap upgrade. What...
I found this yesterday and it's teasing me. http://http://orlando.craigslist.org/cto/1884810633.html It says firm on the price, is it worth it?
I just picked up a replacement frame for my cj5. It needs some work but is in much better shape than what's under it now. Has anyone found away...
I hate to see that. My Jeep hasn't seen a lot of use but twice in the last couple of years I've had a coil go bad. The first was the one that...
Took delivery of my shiny new carb last night. I haven't compared it directly to the old one yet but the geometry looks the same. What's odd is...
I planning on my jeep redo this fall and am research mode. The body is settling arround the frame due to rust and I'm sure the springs are...
Good morning. I'm, once again, thinking of redoing my jeep once it cools off and am in research mode. A guy on craigslist has what he calls a...
Back to my '49 truck with a flat head four. Is the starter compatable with other jeep models and years? thanks.
I bought a set of replacement floor covers (used) and found they don't fit my fiberglass tub. The original tub is still on the jeep and has a...
The small rectangular cover with the shifter hole. Does anyone know if a CJ3B cover will fit on an early CJ5? Thanks.
Separate names with a comma.