It's been quite a while since I did a 304, but if I remember correctly there is almn. rocker caps that hold the rocker in place that wear. Mine...
I was a HUGE believer in "Never Seize", still am, but not as much I'd mix some in grease and fill a small grease gun with it. When I rip my off...
WOW! once agian this is a timely posting. I had the idea of making a Meyers hard top into a 1/2 top. My plan was to find a ratty Meyers without...
I've never had much faith in the oil soaked felt between the bushing and crank. I was taught to pack as much wheel bearing grease in there as...
I've had some that were a bastard to bleed. If I think it's the master, I've taken the lines off, threaded in a fitting plug and see if the...
It should fit, I have a '65 Meyers on my '74. To make sure before I paid the $$ and hauled it home. I measured across the windshield, (59 1/2"...
If you take a step back.......... then a step forward.......... Look your doing the "Hokie Pokie"!! Ok serious........... If you look how BOTH...
I've shifted into 4H from 2H and vera visa a few times on the fly. I make sure I've slowed down and use the clutch, Bada-Bing in it goes! Never...
Remember to add a bit of rubber between the tank and the straps, (to keep chafing of the plastic tank and a fuel leak. (I dunno how, but dirt and...
ditto. use nothing. If you use something, chances are it'll burn off the gasket and you'll be back to a leak. (don't ask me how I know).:) Make...
It's been quite a while since I did mine (last year) on my "74 and longer (2 years er so), since I did it on my '61. Me thinks I cut the flex...
Me thinks it SHOULD be a T-14 trans (3 speed) dunno what the 4 speed # is and a Dana 20 transfer case. (I got the info here, there is a tech...
Soooooooooooooooo, What is the down fall with a CRT dist? What are the up sides? If I want to use a Chevy 250 HEI in my 232, I have to find a...
You'd think with THAT much oil going??? it's be ALL over the place. I'd have someone do a comprssion test or yank the valve cover(s) off and...
I WAS hoping the kid was gonna junk the donor jeep and I'd put the fuel injection in mine. I thought Gary would learn TONS swapping the injection...
Separate names with a comma.