I have a bunch of stuff kicking around the shop that I put together as I built my jeep that I no longer need. Nothing special and I would prefer...
Looking forward to getting more involved here! I bought this keep when I was 17 (back in 1997) and I’ve had it for 25 years. I’m going to start...
Just ordered a fuel pressure regulator and Inline fuel filter but am having trouble figuring how how/where to install them on my f-134 1964 cj5....
I need help figuring out why there is oil spraying from the fram filter cannister all over my firewall, the air cleaner, underside of air intake...
Just bought a 1964 Kaiser CJ5. It had a frame of restoration some years ago, but that’s all I know. The previous owner didn’t have any...
Calling all CJ-5 gear heads - I'm having an issue with my Carter carb specifically, I believe something has gone wrong with the linkages and choke...
Well it always gets a little more interesting with every turn of the wrench. Pulled the cylinder heads off a 69 Jeep CJ5 with a 225 Oddfire V6....
That's not OMIX. My T150 pops out of 1st gear on decel. I pulled the top cover and before pulling it fully off I tilted it up just enough to...
I've completed a rebuild and am trying to determine if I need to connect the PCV line from the driver side valve located right above the fuel pump...
I recently rebuilt a 1970 CJ5 with a F134 and a T90. Dropped the transmission and put in a new clutch and shifter top with forks. The...
Long story short: I've moved to Richmond, VA, and I'm looking for a Jeep mechanic to help me with a couple of things that are, realistically,...
Good afternoon, Relying on the kindness for the group on this one. Live in Baja and my 69 Dauntless has a rummy carb per the mechanic. I have...
Does anyone know where to find the rubber bumper (or stops) that goes on the rear legs at the base of the CJ5 seats? Thanks!
Just purchased a so called military f head engine. Can someone ID differences between a regular and a military version? It has a 1 3/4” crank bolt...
I have searched this site extensively and cant find anything on this. So here is the issue: On my 65 CJ5 restoration project, I installed a new...
So I am in the final stages of a nut and bolt restoration of a 67 CJ5 for my wife. Went back to a 225 dauntless, complete new wiring harness, and...
Hi, I am working on upgrading to disc brakes and I have a couple questions for anyone that's worked on the wheel bearings before. Does the...
I've got a CJ5 here I'm working on for someone else. The Carb was supposedly reubilt by an unknown shop and it's missing parts. Float, flat...
As the title will suggest I have decided to dive head first into something obscure, odd, and difficult for no more of a vailed reason, than why we...
Did they come with recovery hooks from the factory? If so where were they mounted? I currently have none and have a set to add but I'm going to...
Separate names with a comma.
