I was going to poish my Alumnum Gauge clusters, but as it it when the sun hits my Grant Wheel I get a nasty glare, I couldnt imagine having that...
Check out the Jeepster Commando Club like was stated earlier. Also Craigshelper or Craigslist can be your friend. I have seen quite a few pop...
Not finished yet since I am still in the middle of a 100% rewire Job [IMG]
Well a lot more progress, but still taking much longer than I thougt. Mostly based on the Cluster F! of a wiring job that was done before hand....
Little update, First off I got rid of the Holley, went Edelbrock and 100% difference. Finished the hose braiding. And today I started on...
There are a 4 to whhat I understand that will swap over, but just make sure that what ever you decide you can mate the Tera Low to it, or do a...
Just don't forget. You can not use Tera Lowed 20 with the T-14. nobody makes the correct bullgear for it. I passed up on a fresh tera'd 20...
Anyone know a Part# Napa or someplace else or a good place to get new bushings for my springs? The springs are in decent shape but almost all...
Have actually tried to find the book, it looks like I might just order it. I have just gotten so mucth conflicting info its better to talk to...
Okay I have researced, and searched, and correct me if I am wrong here. I have heard some people say that early 231 heads will fit with no...
Okay if your still watching this thread I got a BIG heads up for you. DO NOT USE SEALED POWER PISTONS Got my new single piston in from...
Okay late on the thread but heres my 2 cents. The engine can be bored we elcted to only do 40 Over bore so if there was a problem we could...
My speakers are on the wall behid the seats like most peoples. I didnt use Marine grade, but a good poly speaker. Maraine grade is nice, but I...
I went through a complete overhaul and mod on my 225 not too long ago. Don't have web sites book marked but you can allways google.. The...
Okay When I rebuilt my engine I used a Delco Remi 10si to replace the orginal unit that was fried. Im looking at going to an electric fan, and...
Give you a heads up... After all the nightmare and everything I fought with on this thing.... The Carb had a flow problem, Speed shop didnt...
Well that pump looks just like the summit Saignaw line pump so I'd say it should work. WOrse case for $50 I guess I can ebay it or adapt it...
Okay I bought a used PS pump and bracket for my 225 so I could lower the aftermarket bracket and pump lower to do my Power Brake conversion......
I have tested what bit of flow I can get tested. But when you pull the fuel line on a mech pump to the carb, once the bowls are empty:) engine...
Just trying to narrow the options. Getting good PSI. Lines are new and clean. Tank is clean. idle through 1st and 2nd up to 50MPH...
Separate names with a comma.