Just because i have the same question. Which side goes up the right or the left?When the manual says crimped edges means the left picture? John,
Hello everybody!! I purchased one tube of permatex #2 to apply to my headbolts as some guru's told me.My question is how much to apply to each...
I was made a head gasket job.And because the head bolts was pitted i buyed some new grade 8.After a question to Walck's he told me that they will...
Re: more power to f-head??? in simple words you say that don't touch the distributor and the timing and use one good electronic ignition.i think...
Re: more power to f-head??? for the advance i will start with 8 and will look how it will goes.i think it will work with 12-15 and with the...
Re: more power to f-head??? ok, i will buy the msd first.the exhaust is on plans.i will change the muffler first.because the tube are in very...
Re: more power to f-head??? so,homebrew2 you told to me that the best off all is the MSD6?20% is a lot of power.and i think that for the smoother...
Re: more power to f-head??? and what about more advance?i heard it first time.all in the f-heads tell for 5.have anyone else try it?
Re: more power to f-head??? alternator conversion 60A.i know a lot from electrical systems.my problem isn't the wiring and the sensors.but if the...
Re: more power to f-head??? ok, i'm thinking that i will start with the more advance and the electric fan. i was made a search for the fan.and...
Re: more power to f-head??? 2. Advance initial timing to 15° (monitor preignition sounds and sparkplug color/condition). so,i can advance higher...
Re: more power to f-head??? what about electric fan?will i gain some power? kone type k&n filter?i think that the oil bath is too restricted to...
Re: more power to f-head??? http://s67.photobucket.com/albums/h302/55m38a1/?action=view¤t=MVI_0656.flv turbo only installed.
Re: more power to f-head??? Turbocharger. Seriously. have some pics with that?anyone try it?
hello, what do you suggest to gain some more power from the f-head engine? mine is 0.40 pistons,pertronix,solex. what about the weber carb?does...
http://i306.photobucket.com/albums/nn268/ktm25089/PICT4339.jpg this is what i have.
i just bought one can of aviation stuff
You'll definitely want to use some Permatex #2 on the tips of the bolts before you thread them down into the block though, Permatex #2 or...
nice,but if i will go to buy a 40 cleaner brush the police will follow me for one year here in europe R)R)R)R)R)
Hello, I have a spiral flute tap.7/16"-14NC.Can i use it to clean the the threads on the block for the head bolts on a f-head engine?Asking...
Separate names with a comma.