Just wondering how tall something like a Bestop Supertop is at the B-billar. Would appreciate it if someone could take a measurement for me. Say,...
Thanks! Think those AA headers look like they might be my best bet.
Are you talking about this thread? Didn't see any AA pics and didn't find anything else in 10 pages...
Thanks! Those look just about perfect. Anybody have any pictures of those AA headers installed?
Have some kind of outside-the-framerails headers that came with the engine, but don't want to use them. AA makes inside-the-framerails headers?...
Thanks Warloch. Read about the design work you did with Novak to develop those headers. Looks like you did a real nice job. Wasn't able to find...
Finally getting around to swapping-in the Buick 225 V6 and the SM465. Have done a lot of searching and reading, but wasn't able to find anything...
Thanks!
I'm about 9hrs away from where my CJ5 is being stored right now, and I need to know how much room there is behind the front seats. Just a rough...
Let's talk about engine LOCATION now. It would be helpful to know where the stock (225 V6) engine was located (front/back, up/down, side/side)...
Thanks! That's really helpful. I've never even seen what the stock V6 mounts look like. Does anyone have a picture handy? Maybe from one of the...
Thanks, I hadn't seen those. Not a big fan of bolting brackets to brackets to brackets though.
So they ARE entirely different mounts? That's really all I needed to know I guess. Thanks, I'll just make some new ones.
I finally rolled my CJ5 into the shop, and am starting to rip into it. First task is to strip it all the way down to have the frame sandblasted,...
If you're adding corner-panel guards anyway, you could reinforce them by notching the corner-panel guards for clearance and then welding a cut...
I've got a 1/2" Craftsmen clicker-type torque wrench that gets the job done alright, but I bought a Snap-On 3/8" TechAngle torque wrench for...
Seriously? Come awn guys. There's NO freakin' way that front axle will hold up to 35's and a locker if you take it off-road.
Sorry, but that 'roll bar' does NOT look safe. If you have to miter-cut the corners, it would be a really good idea to add flat-plate gussets on...
That will probably be fine for a 31" tire, but anything mounted only to the bumper will tend to wiggle, vibrate, flex, rattle, you get the idea......
I understand what you're saying PeteL, but I don't really agree. Those old Jeep bodies aren't insulated very well where they are bolted to the...
Separate names with a comma.