I was trying to wire up my horn but my steering box doesn't have the hole in the bottom of it. It's in a 62 CJ5, there is a button on the...
Hey guys, Can you help me figure out what vehicle this rear brake spring is out of. My 62 CJ5 has 11 inch brakes on the back and I can't find a...
I just finished installed a new clutch (friction disc, pressure plate, throwout bearing, and clutch fork). I started the 5 up today and tried to...
Can anyone tell me the bearing cap surface to bearing cap surface measurements of the early Dana 25 knuckles vs the later knuckles? I'm working...
I just installed the overdrive in my CJ5. It went in easily but when I rotate the drivetrain I can hear a very slight running sound. I'm sure...
I just rebuilt Dana 18 transfercase in my 61 CJ5. I purchased a new intermediate shaft and installed it but with the shaft fully seated the...
I towed this CJ5 home from near Hartford, CT just about 1.5 years ago. It was in pretty good shape overall. It’s a 62 that’s was well used but...
Hey guys, I'm trying to get my T90 rebuild finished up and I have a small bag with 5 small plastic washers in it from Herm's kit that I'm not...
While I was replacing the king pin bearings on my front axle I decided to replace the wheel bearings as well but the ones that came out were not...
Hello Everyone, I've got the Ramsey PTO for my CJ5 mostly back together but I need to replace the felt seal that goes around the shifters. I was...
Last night I got a chance to look at the parts from my T90 and I need to order some new parts. I was flipping through a catalog to check some...
I pulled the flywheel off my Perkins diesel to get it resurfaced and put a new pilot bushing in it. I have been looking for a replacement bushing...
Tonight I pulled the bellhousing off the cj5 to determine exactly what clutch kit I need to order and none of the kits I can find pictures of have...
I am trying to rebuild the Ramsey pto on my 5 and I am having no luck finding a new seal for it. The seal that was in there is marked 'Victor...
My dad emailed me this picture of a trailer he saw for sale. From looking at the other pics on this forum I think it’s an M416, does that sound...
I’m in the process of rebuilding my D18 and everything was going smoothly until I put in the new clutch shaft bushing. The old one was pretty...
A friend is look at getting an early cj5 and he send me these pics of one he looked at. It’s a Tuxedo Park, (8322 14102). Its original and...
I am in the process of rebuilding my transfercase and transmission and I wonder if I should replace the throwout bearing and clutch while I’m at...
Part of my overdrive that was in the transfercase was destroyed. I'm going to send the overdrive off to Herm to be rebuilt but I was going to...
So I finally got some time to work on my CJ5 this weekend. The jeep will start but when I would try to drive it would make a grinding sound and...
Separate names with a comma.