TexColorado, Have you talked to these guys, http://home.foothilloffroad.com/ I am looking to do the same thing. I want mine the same...
I did before I built it. In CA you need the following to tow doubles; 1. Class A license with doubles endorsment 2. Tow vehicle must be...
I made mine out of some angle iron and bolts I had laying around. I butt welded the angle to the bumper, drilled a hole in the angle, and put a...
Looks great! Keep us posted on your progress. I need to build one also. I haven't figured out how to do the latch yet. I want something...
Your right xlr8n! Right out of a warm engine, it spreads very nice.
I just bought a 78 cj5 with a 232 inline 6. The engine is leaking oil from the rear main area. Has anyone dropped the pan and changed the rear...
How about 33x14.00x15's. Jeep has a 4" lift and wheels are 15x10 with only 2.5' of backspacing.
Mike, I dont recall the part #s. Ive had them installed for 5 years now. Best I can tell you is contact Parts Mike, he is the one who sold...
I am running Dutchman 30 spline flanged axles in my 65 cj5. I bought the parts to do it from parts mike. Also put in a 30 spline detroit locker.
It doesn't sound much harder than adapting a ford t 18. http://www.novak-adapt.com/knowledge/420_to_amc.htm With novak's adapter the total...
I read on Novak's site that you can mate a SM420 to the 258 engine fairly easily. Has anyone done this conversion? If so, what kind of unexpected...
1 inch higher in ride height from my original shackles.
I have them on my cj5. They are 2 inches longer than my stock shackle, thus providing 1 inch of lift.
I was planning to put some linseed oil on the deck. I can either put my camp trailer, boat, or flat tow my buddies m38. I have not figured the...
I built this trailer out of an old travel trailer. I cut 4 1/2 feet off the end, moved the axles forward, and did a spring over. I put a reciever...
Power steering or not, I would like to see how the shaft is ran to the box and how it clears the exhaust, motor mount, front X-member. If you...
Funny, I just posted the same question 3 minutes earlier. :} Hopefully we will get a response from someone who has done this.
I would like to replace my Ross steering with a Saginaw setup. Has anyone done this one an Early cj5 with an F head? I would like to retain...
You guys would be disappointed to know I just cut 5 ft off the jeep hauler I'm building (still has 19ft of deck space). It started out as a 27 ft...
Separate names with a comma.