OK, you put fresh gas in the tank. Is the gas making it to the intake when you work the throttle linkage? You say you have spark and the timing is...
Probably beep fluid. Sorry, couldn't resist.
For years, I didn't own a set of feeler gages. I had a spark plug gage a matchbook and my ear. That is how I was taught to set up an engine, so...
I don't see that as being a problem. It is pretty typical with mechanical gages. If you want to see a faster reading, switch to a sending unit and...
When I built the harness for my 62, I ran individual power leads to each gauge in the dash and grounded them all off a common ground. A variation...
You have to use a separate site, such as photobucket or similar.
I could be wrong but, 8305 designates it as a Universal and 165801 place the manufacture date as Nov.1963.
Nice Jeep and welcome from Ward, Arkansas.
What he said. Mine comes on at 200 though.
From reading this, I would look at the adjustment and return spring first. My thinking is the pedal is not returning completely.
I just replaced mine last year from O'Reilleys.
If I was to hazard a guess, I would suspect an electrical switch at the pedal. I have a dual master cylinder but only one switch. It is mounted to...
Separate names with a comma.
