1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Recent Content by ecamp55

  1. ecamp55
    Post

    brake bleed issues

    Go to your local FLAPS and get a set of Speed_Bleeders. If your other components are in good shape it make brake bleeding a one-person job and...
    Post by: ecamp55, May 5, 2008 in forum: Intermediate CJ-5/6/7/8
  2. ecamp55
    Post

    Nerf bars

    Nope, they're different. In 74 and earlier the frame rails are parallel. In 75 and later the frame rails taper towards the front.
    Post by: ecamp55, Apr 22, 2008 in forum: Intermediate CJ-5/6/7/8
  3. ecamp55
    Post

    Need to replace seat belts. Bolts a problem.

    I ended up having to heat them up with a torch to get mine out. Took ALOT of heat but they finally broke loose.
    Post by: ecamp55, Apr 22, 2008 in forum: Intermediate CJ-5/6/7/8
  4. ecamp55
    Post

    Some Unanswered Questions About lift

    This is exactly what I did with my 74. I went with the MORE greasable shackles and they work great. I did not do a T/C drop and don't need it with...
    Post by: ecamp55, Apr 22, 2008 in forum: Intermediate CJ-5/6/7/8
  5. ecamp55
    Post

    2" or 4" lift???

    BDS. It comes with shocks too
    Post by: ecamp55, Mar 18, 2008 in forum: Intermediate CJ-5/6/7/8
  6. ecamp55
    Post

    Stainless Jeep Parts

    http://www.bdashfab.com/ Look at this site and talk to Jim. He got a CJ7 body from the Phillipines. He's downstate from you.
    Post by: ecamp55, Mar 17, 2008 in forum: Flat Fender Tech
  7. ecamp55
    Post

    74 cj5 suspension help

    I think you're on the right track with this. I put my BDS 2.5" lift on about 3 years ago and am completely satisfied with it both on and off road....
    Post by: ecamp55, Mar 17, 2008 in forum: Intermediate CJ-5/6/7/8
  8. ecamp55
    Post

    Mc 2100

    Make sure you pick up one with the PCV nipple on the base of it. You'll find many older truck carbs in the yards without this conn.
    Post by: ecamp55, Mar 13, 2008 in forum: Intermediate CJ-5/6/7/8
  9. ecamp55
    Post

    '74 CJ5 front shackle busing install help??

    After you get the old sleeve cut out, the new bushings will slip right in without freezing or heating. I used a hacksaw blade also and it went...
    Post by: ecamp55, Mar 13, 2008 in forum: Intermediate CJ-5/6/7/8
  10. ecamp55
    Post

    What lift for a 74 CJ5

    That's exactly what I have and I'm completely satisfied. 2.5" BDS lift, 33" BFG's, extended shackles from M.O.R.E. and an extra set of pucks under...
    Post by: ecamp55, Mar 5, 2008 in forum: Intermediate CJ-5/6/7/8
  11. ecamp55
    Post

    Emergency Brake Release Handle

    I think I got mine from Krage www.jeepdoc.com It seemed kinda cheaply made but it's been working very well for a couple of years now.
    Post by: ecamp55, Dec 21, 2007 in forum: Intermediate CJ-5/6/7/8
  12. ecamp55
    Post

    which winch

    8274.....I got mine used for 300.00 in Denver. I've seen several aroung CO and none went for more than 500.00
    Post by: ecamp55, Dec 12, 2006 in forum: Intermediate CJ-5/6/7/8
  13. ecamp55
    Post

    '74 longnose

    Yep, you have the correct bracket. It should mount on the drivers side and is 1 piece.
    Post by: ecamp55, Dec 9, 2006 in forum: Intermediate CJ-5/6/7/8
  14. ecamp55
    Post

    Swap in a T-18 from J20 to a CJ - how difficult?

    You'll need to change the mainshaft as the one from the J truck is waaaaay to long. Also the bearing retainer will have to be changed for the same...
    Post by: ecamp55, Dec 5, 2006 in forum: Intermediate CJ-5/6/7/8
  15. ecamp55
    Post

    Roll bar

    I replaced the top of fender roll bar on my 74 CJ5 with one from a 84 CJ7. I had to cut a hole into the underseat toolbox to make it fit. Works...
    Post by: ecamp55, Nov 30, 2006 in forum: Intermediate CJ-5/6/7/8
New Posts