When you mate the cases together there is a metal piece that keeps two rods in place. Mine was slightly cocked and kept the case from fully mating...
I had a Chevy P/U with headers that did the same thing. I tried the fancy starter insulation, and also made a heat shield which all failed. I...
The bearing is made by SKF: SKF Explorer 6208 2RSNRJEM it also says 72-Made in USA 12 341 C I purchased mine through Carquest
I made another access cover next to the one that is already on the tranny hump on the passenger side. I remove the breather plug through this...
Do you need part # for sealed bearing I can get it 4 u
I used conveyor belt that I cut in squares between the frame and body.
Check the fuel pump and filter first...make sure the "go juice" is getting to the carb. and go from there.
On a F-134 can you remove the pistons from the bottom after you remove the crank ???
I was able to remove the front bearing by removing the shift tower and using a brass punch to tap it out. No problem with the needle bearings so...
Can you remove the front main bearing through the front of the case or is it pressed on the main shaft ???
Dad always said "don't fix it if it ain't broke"
I love a Q-Jet but even after buying several books on them I still had trouble. If I can make a suggestion go to some of the after market marine...
Separate names with a comma.
