1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

1970 Jeep Rebuild

Discussion in 'Builds and Fabricators Forum' started by Rozcoking23, Feb 8, 2011.

  1. Feb 8, 2011
    Rozcoking23

    Rozcoking23 RUN & GET BIT! 2024 Sponsor

    Stockton, CA
    Joined:
    Mar 29, 2008
    Messages:
    805
    This is my 1970 CJ5 that my dad bought brand new back in september of 1969. It has the Buick V-6, 3 speed with over drive, dana 18 single stick transfer case, flanged dana 44 rear end and dana 27 front end. I bought it from my Dad back in 1984 when I got my license. I drove it for 3-4 years then parked it in my Grandmothers garage and forgot about it for 20 years.
    When my Grandmother passed away I brought it home and parked it in my garage. It wasn't until the fall of 2008, when I took my Daughter deer hunting with a buddy of mine in his jeep, when she asked me to get my jeep running again did I do anything.
    This is after a new 1.5" lift was put on, along with new rims and 32" Pro Comp tires. I also added disk brakes to the front, but left them manual:
    [​IMG]
    This is the original harness torn out:
    [​IMG]

    [​IMG]
    This is installing the new Painless harness:
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    New dash and new gauges:
    [​IMG]
    [​IMG]
    First trip pig hunting with my Dad (in the background) Feb 2009:
    [​IMG]
    more later..........
     
  2. Feb 8, 2011
    Rozcoking23

    Rozcoking23 RUN & GET BIT! 2024 Sponsor

    Stockton, CA
    Joined:
    Mar 29, 2008
    Messages:
    805
    Some time in March of 2009 I added a SM420 4 speed transmission with a Novak adapter, hydrualic clutch, power brakes, and swinging peddals to the jeep, and power steering.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  3. Feb 8, 2011
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,513
    nice Jeep and to see it still in the family
    those dash placques have to be valuable...
     
  4. Feb 8, 2011
    Rozcoking23

    Rozcoking23 RUN & GET BIT! 2024 Sponsor

    Stockton, CA
    Joined:
    Mar 29, 2008
    Messages:
    805
    In August of 2009, I took my Daughter deer hunting.
    THIS:
    [​IMG]
    CAUSED THIS:
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  5. Feb 8, 2011
    Rozcoking23

    Rozcoking23 RUN & GET BIT! 2024 Sponsor

    Stockton, CA
    Joined:
    Mar 29, 2008
    Messages:
    805
    thanks jpflat2a, i'm trying to get it done. I pulled the entire thing apart in Feb of 2010. i have complete rolling chasis back together and started the body work.
     
  6. Feb 8, 2011
    Rozcoking23

    Rozcoking23 RUN & GET BIT! 2024 Sponsor

    Stockton, CA
    Joined:
    Mar 29, 2008
    Messages:
    805
    I started tearing it apart for a re-build in Feb 2010.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  7. Feb 8, 2011
    '74Renegade

    '74Renegade Active Member

    Fair Oaks, CA
    Joined:
    Sep 1, 2005
    Messages:
    1,275
    I love the last place plaque.......just hilarious. I grew up in Stockton so maybe it just hilarious that Sherwood Mall would have a 4wd show. :)

    Anyway, good work......can't wait to see it finished. :beer:
     
  8. Feb 9, 2011
    Rozcoking23

    Rozcoking23 RUN & GET BIT! 2024 Sponsor

    Stockton, CA
    Joined:
    Mar 29, 2008
    Messages:
    805
    74Renegade, I don't think it was a car show that was being held. My parents belonged to a local jeep club, and I think it was some thing to do with the March of Dimes charity. I had already bought the jeep from my Dad, and had painted it in shop at school. One of my Dad's friends from the club had the plaque made and had stuck it to the dash, and we just left it.
     
  9. Feb 9, 2011
    Rozcoking23

    Rozcoking23 RUN & GET BIT! 2024 Sponsor

    Stockton, CA
    Joined:
    Mar 29, 2008
    Messages:
    805
    After I tore apart the whole thing I started to look for a "new to me frame". After I found one I fit it for wider springs.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    I just want to say, without this site, and the knowledge of all you, I wouldn't be where I'm at with this project! Thanks!
     
  10. Feb 9, 2011
    Rozcoking23

    Rozcoking23 RUN & GET BIT! 2024 Sponsor

    Stockton, CA
    Joined:
    Mar 29, 2008
    Messages:
    805
    Next was a new front bumper.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
    Buildflycrash likes this.
  11. Feb 9, 2011
    givemethewillys

    givemethewillys Been here since sparky ran it. 2022 Sponsor

    New Kent, VA
    Joined:
    Jun 21, 2005
    Messages:
    1,998
    wow looks great, keep em coming!
     
  12. Feb 9, 2011
    '74Renegade

    '74Renegade Active Member

    Fair Oaks, CA
    Joined:
    Sep 1, 2005
    Messages:
    1,275
    Very Cool. I love that someone went through the trouble of making a last place plaque and that you are proudly displaying it. Awesome. Keep up the good work.
     
  13. Feb 11, 2011
    supertrooper

    supertrooper Member

    moreno valley, ca
    Joined:
    Nov 12, 2007
    Messages:
    742
    your supposed to shoot the deer, dot run it over. or were you trying to save on permit fees?:p good luck with the rebuild.:stout:
     
  14. Feb 12, 2011
    Rozcoking23

    Rozcoking23 RUN & GET BIT! 2024 Sponsor

    Stockton, CA
    Joined:
    Mar 29, 2008
    Messages:
    805
    Bullets are expensive!
     
  15. Mar 1, 2011
    Rozcoking23

    Rozcoking23 RUN & GET BIT! 2024 Sponsor

    Stockton, CA
    Joined:
    Mar 29, 2008
    Messages:
    805
    After the front bumper was done I started plating the whole frame. I first used 1.5"x1.5"x1/4" angle iron on the inside of the frame rail, both top and bottom. I then used 4"x1/8" plate to box the frame in. On the front horns and rear horns I used 4"x3/8" plate to box these sections for more strength.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  16. Mar 1, 2011
    Rozcoking23

    Rozcoking23 RUN & GET BIT! 2024 Sponsor

    Stockton, CA
    Joined:
    Mar 29, 2008
    Messages:
    805
    I then made room in the cross member for my power steering. after notching it I plated over it with 1/4" plate.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  17. Mar 1, 2011
    djbutler

    djbutler Sponsor

    Rio Linda CA
    Joined:
    Nov 5, 2007
    Messages:
    727
    Looks Good!
    It would look even better if you had some argon/CO2 instead of using flux core wire. Try it, you will love the difference.

    Don
     
  18. Dec 20, 2011
    Rozcoking23

    Rozcoking23 RUN & GET BIT! 2024 Sponsor

    Stockton, CA
    Joined:
    Mar 29, 2008
    Messages:
    805
    It's been awhile since I have updated post. I have finished frame, (welded and painted). I have re-built the motor, tranny and transfer case. Rebuilt the rear end, (posi, bearings). Also fitted rear end with 11" brakes off the extra Dana 30 I have. I also fitted my early 70 with a rear tank to go with the original front one. All the gas lines have been ran down the frame. I also have finished plumbing the brakes. I reinstalled the original front dana 27. I'm waiting for a gear change and an ARB locker for the front dana 30 I have, then I will install it. I'm in slowwwwww process of doing body work.
    Pics soon to follow on progress
     
  19. Dec 20, 2011
    Rozcoking23

    Rozcoking23 RUN & GET BIT! 2024 Sponsor

    Stockton, CA
    Joined:
    Mar 29, 2008
    Messages:
    805
    Thanks for the advise, you were right BIG difference in quality of welds.
     
  20. Dec 21, 2011
    Rozcoking23

    Rozcoking23 RUN & GET BIT! 2024 Sponsor

    Stockton, CA
    Joined:
    Mar 29, 2008
    Messages:
    805
New Posts