are the bellhousings innerchangable between the early flat head fours & the F heads fours? How about the flywheels? Do you have to modify the...
Everything is stock. I am looking for an extra passenger side buick V6 exaust manifold...if you know of any, let me know! Thanks...Tom
Cool... A BFH might make this jeep look a little better! Thanks for the info...Tom
I forgot about the pumpkin...good call. Were you able to run the stock raidaitor? It looks to be pretty tight. My raidaitor is...
Great Idea! Would there be any draw back to just swaping sides & have them both dump forward & wrap under the motor? I dont think the...
I have a 42 Willys MB that I am up gradeing to a V6....it had a F head with a dorky hood scoop. Other than the V6 & T 90, it's pretty much...
iT'S NOT THE BIG HEAVY ONE...iT HAS BEEN IMPOSSABLE TO FIND A PRESSURE PLATE FOR. nO ONE KNOWS WHAT YEAR IT IS,THAT'S WHY i THOUGHT THE CASTING...
tHANKYOU.. i'LL POST THE QUESTION ON THIS SITE. tHANKS AGAIN...tOM
I HAVE A FLYWHEEL FROM A BUICK V6 & I am not sure weather it is a oddfire or evenfire flywheel. The casting # is :1263279-2 -or- 1268279-2 Can...
I have an advanced adaptors brand adaptor I bought off craigslist. I have heard of mike bolton...I'll look him up & pay him a visit. Thankyou...
I am converting to a V6 & switched the short input shaft in my T 90 to the longer one. The shorter one had a felt washer or seal in the input...
Good idea... Thanks again for all your help.
Any Idea for what chevy? I know the parts guy had no clue when we discovered that the buick throwout bearing wouldn't work.
I have a T90 & am doing a 77 buick V6 conversion. I got a Napa clutch kit # MU 5469-A1 & the Throwout bearing inside dia is to small. I have...
I get it...I had a posi in the camaro. Thanks guys...Tom
WOW! Thanks for your help. Not to question...but only to learn: On a camaro I had I had checked it with 1 revolution. We always called the...
I was checking out the gear raitio on a 1961 parts doner jeep & came up with a 2.8 gear raitio...does this sound right? I clamped one of the...
I havn't got much done yet...I got 5 kids ...a few in soccer & my firewood to cut before I can get to it. I am hopeing to re-start again at the...
Thankyou for the info. I'll go check out the crank for room for a pilot bearing & then go & spend some $ at novak. Thanks again.
Sounds like all I have to do is bolt it up & I'm good to go. I am looking to use a T 90...will any 66- 71 jeep V6 bellhousing work...or were the...
Separate names with a comma.