I need to find some engine to trans alignment dowels for a 258. Im in San Diego and helping a friend with his cj 5 and the PO didnt have any in...
Any body know what size dowels a 258 needs for the trans to engine block. Will a chevy work.
Im helping a friend with a 79 CJ 5 he got. The clutch needed an adjustment because it wouldnt release all the way. It has a T18 with a 258. its...
I got a good deal on this. I made the mount and installed it over the weekend. I also studded my battery to make it easier to add cables. [IMG]...
I finally got the wheels and tires that I have been very patient waiting for. These came off a CORR PRO 4 race truck. I got 5 wheels and 6 tires...
My chevy power steering pump started leaking out the front seal so I replaced it with a used one and the first time I locked the hubs and turned...
I found a Mark Williams Dana 60 R), 65 1/2" wide. With 5 on 5.5 axles detroit locker and 4.11 gears new brakes. This axle has not had oil in it...
R)I took it out for the first time yesterday and last nite to ocaitilla wells. Yes it was a little WARM but we started our first run about 5pm and...
[IMG][/IMG]
I am thinking about making a torque arm to stop wrap up. I have an Idea how to do it but I want it to NOT hinder suspension movement. :? Any...
I found a used DETROIT locker for the front axle for $250. Whats the opinion on detroits in the front? I know ARBs would be preferable but the...
Heres the plan. After using the tape measure and not being happy with a 12 inch driveshaft with the motor/trans that I wanted I decided to go...
Im new here so bear with me.. I have had a 81 CJ-5 for a long time. Ten years ago I tossed the engine and trans. My origional plan was to put a...
Separate names with a comma.