The SM 420 2nd. speed assembly isn't like a regular tranny synchro at all. The gear itself has the clutch splines in it and if it has a tapered...
I forgot to mention too, before boring any bell, mount to your engine and dial indicate the bore for run-out( machine shop will know what I am...
Go to any wrecking yard and get a Buick, Olds V-6 aluminum bell from one of the stick shift cars. Works great! Bore for the 465.
My experiences with the SM420 are that when worn excessively they will slip or pop out of 2nd under power. As far as the transfercase goes, you...
I took off once with the shield down and not strapped, quite the shock when that comes up at ya at about 40 +.!!!!!
Blast, Phosphouric acid, wash, dry, Epoxy primer and black paint Acrylic is tougher than Rustoleum for getting scratched off. I just picked up...
Victor Wrench for the stuck bolts. Just a thought, don't put a bunch of thick gooey stuff on your frame like POR or Bullet or...
Re: need a pic of the hood to windsheild latch HA HA I think I have mine upside down on my CJ. No wonder I couldn't get it to work!!
Like you say. I had to do the cut and stitch at the back corner lips. For reasons beyond me the corners turned out about a 5* angle. This may be...
Yea. I ordered the cowl gasket and that will probably change everything again, so on hold from here. The Jeep once upon time had the old rear...
Man oh man! I am in the process of fitting a Meyers steel top to my CJ, tweaked here and there, and everything has been "made " to fit on the...
Contact Eric at Novak if you need anything for the re-build.
AAAAAAAAAAHHHHHHHHHHHAAAA!!!!! Now that makes scence! never heard of one in a car. I read a whole report I got from Buick about the engines (...
That dizzy is a whole different can of worms you don't need for the Buick. That's the first i heard of the odd fire Chevy V-6 Must be set up for...
Big glove box on left. Dead give a way
Are the firing orders the same on these 2 engines.? Seemed like they were. You should be able to tell by the sound of the thing running, since...
When converting from the 4 to a V-6 it was common to find the other right exhaust manifold on the drivers side to clear the old steering box....
I copied AA also and ran 40 pitch chain sprocket. The bracket was flexing so I guuseted the back over to a mounting tab on the vertical portion...
Do the RIGHT thing and use a 420. They are meant to be in a CJ. No chopping of the floor at all, in fact I used the stock tranny tin that covers...
I got it. It works off the firing impulses.
Separate names with a comma.