Been a while since I hung out here, but I still have a unhealthy obsession with my Intermediates, even bought one to be a wheeler a couple years...
Getting ready to make some custom height body mounts. What are the cool kids using for material these days? I've looked at the boat rollers but...
I need a dimension from somewhere on the firewall to somewhere on the front of the frame. Keep in mind that I have no fenders, hood, or grille on...
So my google-fu is weak tonight. I'm looking for pictures and descriptions of how you guys have made your own floor supports. I drafted a couple...
I am in the process of cleaning up a frame for boxing and I can't seem to remember what this bracket is for. I want to say a trackbar or steering...
I am finally getting around to rebuilding my Dad's 5 after years of threats. The Jeep when he got it [IMG] Which lead to [IMG] and...
We just hauled home a new 258 to replace my cracked one. Same engine codes basically both 1978 2v 258. The new one has a weird intake. the...
Please? My dads 98 TJ has some screwed up transfer case nutserts, to the point where on side is held on by one bolt. I am not concerned with...
So i just got everything back together on my 73 with the 79 258 and got a little surprise... Block is cracked. straight line between the freeze...
about front cage sections that bolt to where the dash meets the tub, like the rockhard cages? I am not a super big guy, but i like being able to...
73 cj5 with 258. i pulled the original running 258 and have swapped in a 258 from a 78. duraspark. i have been messing with it for a while...
So i was pondering today. I am still in the process of swapping a motor/trany/tcase from another jeep into my 73. I know that the tranny is a...
So i got my clocking ring last week for my 300 and tried to install it today to find that the two bolt holes closest to the shift rails are not...
I'm pretty sure i can figure it out but If somebody has pictures of all the bracketry for an intermediate supertop. the windshield piece mounts...
So a couple weekends ago while i was on spring break i tossed my new power-train between the rails on my 73. I kind of thought about it before i...
so I pulled the original powertrain out of my 73 (258) and am preparing to swap in a 258 from a 78 with a t176 and d300. when i pulled the new...
So i built this for a TJ but i guess the design could be adapted to anything. I used a short stick of 2x2x3/16 tubing, a 2 inch piece of 1 inch...
so i first read about it on here and in case anybody needs evidence of it, i am currently testing it in my kitchen as we speak as a chem final....
I am putting my 73 in the shop real soon to get a whole pile of goodies from a parts jeep (3 inch lift 33"s 258 out of a 78 T176 backed by a...
alrighty, i am out of my element i am an intermediate cj5 guy so i'm not so well informed here. Me and my dad went out to go look at a Gpw and a...
Separate names with a comma.