1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Search Results

Search Again
Page 1 of 3
  1. Griff75
    Post

    Carb adapter

    http://cgi.ebay.com/ebaymotors/Trans-Dapt-2199-Carb-Adapter-Ported-Aluminum-Kit-Summit_W0QQitemZ370181031494QQcmdZViewItemQQptZMotors_Car_Truck_Par...
    Post by: Griff75, Apr 21, 2009 in forum: Intermediate CJ-5/6/7/8
  2. Griff75
    Post

    Carb adapter

    Thanks. Due to that post having the part number, I found some of them. Summit racing had 9 in their ebay store. They sure are proud of them...
    Post by: Griff75, Apr 20, 2009 in forum: Intermediate CJ-5/6/7/8
  3. Griff75
    Thread

    Carb adapter

    Does anyone know where I can get an adapter to put a holley square bore to factory amc 4 barrel manifold? A spread bore adapter doesn't work. The...
    Thread by: Griff75, Apr 20, 2009, 5 replies, in forum: Intermediate CJ-5/6/7/8
  4. Griff75
    Post

    Low gear transfer case swap advice

    IIRC Teraflex has a 3.15 low range kit for the D20. Found it for you http://www.teraflex.biz/products/low20-manual.html John
    Post by: Griff75, Apr 15, 2009 in forum: Intermediate CJ-5/6/7/8
  5. Griff75
    Post

    Cheap longer brake lines

    I figured some people would like to know this. I did look at the 80+ ford brake hoses and they won't work. I didn't look at the 79 down hoses...
    Post by: Griff75, Apr 7, 2009 in forum: Intermediate CJ-5/6/7/8
  6. Griff75
    Thread

    Cheap longer brake lines

    I previously bought a set of steel braided longer lines and put them on our jeep. They were kinda pricey. We have a 78 CJ 5 with disc brakes. The...
    Thread by: Griff75, Apr 7, 2009, 6 replies, in forum: Intermediate CJ-5/6/7/8
  7. Griff75
    Post

    Widetrac axles

    We got the old amc 20 rear out this past weekend. [IMG] We finished making the caliper mounts and drilled the rotors for larger hole so they...
    Post by: Griff75, Apr 7, 2009 in forum: Builds and Fabricators Forum
  8. Griff75
    Thread

    Widetrac axles

    We have been slowly building some widetrac axles from a CJ7 for our 78 CJ5. They have all chromoly shafts with 760 joints, 4.56 gears, lock right...
    Thread by: Griff75, Mar 22, 2009, 3 replies, in forum: Builds and Fabricators Forum
  9. Griff75
    Post

    TSL's on the street

    If you want swamper but want to drive on the road a lot, look at SSR's. I have a set of 33x12.50-15s on our 78. They are a bit louder than all...
    Post by: Griff75, Nov 15, 2008 in forum: Intermediate CJ-5/6/7/8
  10. Griff75
    Post

    D44 outers on a D30?

    Thanks! John
    Post by: Griff75, Nov 3, 2008 in forum: Intermediate CJ-5/6/7/8
  11. Griff75
    Post

    Engine?

    I guess I should have mentioned my CJ had a 258 originally. I put the 304 in it myself. I have the 6 cylinder frame engine mounts. I'm kinda...
    Post by: Griff75, Nov 3, 2008 in forum: Intermediate CJ-5/6/7/8
  12. Griff75
    Thread

    D44 outers on a D30?

    I've heard Dana 44 knuckles out will fit on a Dana30. Has anyone done this? I have a widetrack axle I'm building and I need some outers. I went to...
    Thread by: Griff75, Nov 2, 2008, 2 replies, in forum: Intermediate CJ-5/6/7/8
  13. Griff75
    Thread

    Engine?

    I'm going to have to do something about an engine for the CJ at some point due to the old one is burning oil and just generally worn out. I have...
    Thread by: Griff75, Nov 2, 2008, 7 replies, in forum: Intermediate CJ-5/6/7/8
  14. Griff75
    Post

    convert ps to manual

    I think you guys are right. I think you could replace just the coupler. The CJ we were looking at doing this on had a worn out u joint at the...
    Post by: Griff75, Sep 7, 2008 in forum: Intermediate CJ-5/6/7/8
  15. Griff75
    Post

    Double Shear Pivot Bushing??

    Don't bother using poly bushings the weight of the tire swinging off it makes it want to dig in. It will also sag badly. I built one like that...
    Post by: Griff75, Sep 6, 2008 in forum: Builds and Fabricators Forum
  16. Griff75
    Post

    convert ps to manual

    The spline sizes of the inputs on the steering box are different. You'll need a new steering shaft to swap. The pitman arm is different as well....
    Post by: Griff75, Aug 28, 2008 in forum: Intermediate CJ-5/6/7/8
  17. Griff75
    Post

    What parts are unique to the Intermediate CJ5's ?

    78 shouldn't have 5 lug hubs. IIRC 82+ have 5 lug. Transfer case skid are unique compared to 76+ Transmissions are different. The body itself...
    Post by: Griff75, Aug 18, 2008 in forum: Intermediate CJ-5/6/7/8
  18. Griff75
    Post

    Dana 30 Disc swap are all 30's the same

    YJ dana 30s are 5 on 4.5 wheel pattern. Theres enough guys around swaping full size axles and one tons you should be able to find what you need....
    Post by: Griff75, Aug 9, 2008 in forum: Intermediate CJ-5/6/7/8
  19. Griff75
    Post

    AMC V8 PCV Grommet

    The AMC one that is found in the HELP brand stuff at most autoparts stores fits nicely. John
    Post by: Griff75, Aug 7, 2008 in forum: Intermediate CJ-5/6/7/8
  20. Griff75
    Post

    Off Road Trailer Build

    Looks like a good start. Miratic Acid is supposed to take galvanizing off of metal and make is safe to weld. Theres stories of people getting...
    Post by: Griff75, Aug 3, 2008 in forum: Builds and Fabricators Forum
Showing results 1 to 20 of 50 Next >
Search Again
Page 1 of 3
New Posts