I Put a Toyota starter in 62 f134 works great more power bolts rite in no problems!
I was thinking of two front head bolts and a side bolt like you said close cut.
Thanks Jason ! That gives me an idea
Ok got a York a/c compressor and I would like to mount it in on the driver side of my 62 cj5 F134. Any one have any suggestion as to where to...
:monkeys: And thus life goes on as man proves ones more that the imposable is possible
Mike's Carburetor Parts - Carburetor Kits & Parts http://www.carburetor-parts.com/ Had what I needed price not bad fast severs
No the tranny was good I rebuilt it before I put it in. I just did not know that there was different t90s. But thanks to these guys I learned.;)...
Ok T90C in and running . Pulled the hill no problem (that was with wife in jeep to) took It out for a test ride all when will. Thanks again:beer:
The coil is new also. Like I said it came up backward no problem. Put the T90C in today should finish tomorrow if I get a chance to work on it....
It's like trying to start out in third gear or tying to pull the hill in the wrong gear. I should get my parts to rebuild my backup T90c tomorrow...
Wow Where was all these Jeep in Pittsburgh when I was looking for parts. Every thing I saw was all ways in Colorado:shock:
I am 40 miles south of you in Pittsburgh I had my 62 body redone by my neighbor All metal cost me a little over $4000 Paint and all A little Hi...
Vacuum reads 18.5 and steady I am in PA know all about snow but next store plows and sands the driveway all winter god bless him
Timing is now about 8 deg btc tires are 215-70r15
rebuilding my backup T90 it is a C I counted the teeth my self. I have not check if the one in the jeep is a t90a or not when I rebuilt it the...
Try taking the Oil pump out and go up from the bottom. a lite tap with a brass drive pin should do it
Hill is my driveway it,s 250 ft.long dirt road and it is steep When I try to come up it bogs down like you are trying to start out in to hi of...
Points, plugs, condenser, rotor, cap, wires all new
:cry:OK everything checks out on the engine vacuum, compression , timing, carburetor. Still no luck! It will pull the hill in revers with no...
I have a 62 cj5 with a rebuild F134 Carter yf carb I get 17 hg. vacuum everything seems to be working fine But I can not get it to pull up...
Separate names with a comma.