My :v6: will only run when the starter is engaged. When I let off the switch it dies.
I had the same problem yesterday, I had plenty of fuel going through the filter and it looked clean. Finally I took the fuel filter out and...
I was wondering if a flowkooler water pump is worth the extra money? does anyone run one and do they work better than stock.
It's a mc for a 1970 chevy truck with disc brakes, I've bled and bled them, I don't have any drag on them, I guess I might not have a 2lb residual...
they are on correctly. I'm thinking that the master cylinder is the wrong size piston.
I have a t14 and d20 out of a commando, I broke the shift linkage and the tc when the front drive shaft broke. I have a d20 out of a j-truck, I...
I just replaced my d27 with a d30 with the thin rotors. I was running a 1970 chevy 1/2 ton truck booster and mc for drum brakes. i changed the mc...
I have a late glass tub on a 69 frame, the wheel base on the later tub is a little longer, but it can be done, I had to fab a lot of my frame...
when I raced dirt track, some guys ran a powerglide with a clutch, I don't know how they did it, but it worked.
Thornbirds suck! Go with the swampers.
I can't explain how one works, but a limited slip allows both tires to spin up to a certian amount of torque, of course this only works if the...
quadratrac is a full time four wheel drive system. the tc has a chain and takes special lubricant. some are high range only some have a low range,...
Your lack of power could be coming from the th350, I had the same problem on mine, I have basically the same set up crossflow v-8 radiator,...
Thanks
Does anyone know where I can get just the springs that go under the poppet balls? I can find them in small parts kits, but my t-case has all new...
Re: Where's My VIN? (New VIN Project, Please Help Out) 8305c17351600, 1969, only thing original left is the :v6: and the D27 all the rest pirated...
A very nice job!
I bought a cross flow aluminum radiator, from the local hot rod store for 170$. It's a universal fit chevy outlet radiator. But I had over heating...
a remote filter for a sbc is easy to hook up. Remove the oil filter, then remove the two bolts that hold the peice on that the filter screws onto....
I run Q bias buckshots with a 225 t-14, D20, 3.73 gears with a trac lok in the front( it don't work that good) and a heavy right foot, all I have...
Separate names with a comma.