1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

dana 20

Discussion in 'Intermediate CJ-5/6/7/8' started by wiley69cj5, May 28, 2007.

  1. May 28, 2007
    wiley69cj5

    wiley69cj5 Got Mud!

    Parkersburg WV
    Joined:
    Dec 8, 2006
    Messages:
    26
    I have a t14 and d20 out of a commando, I broke the shift linkage and the tc when the front drive shaft broke. I have a d20 out of a j-truck, I know it has better output shafts, but will it bolt up? thanks
     
    wiley69cj5, May 28, 2007
    #1
  2. May 29, 2007
    DrDanteIII

    DrDanteIII Master Procrastinator

    Milford NJ 08848
    Joined:
    Mar 21, 2007
    Messages:
    1,519
    The d20's all have the same "texas" bolt pattern. The only difference is the inputs if it came out of an auto. The d20's behind the manual trans has a 6 spline input gear, while the autos have a 10 spline input gear IIRC. The only other problem you might have is the legnth of the shifter linkage.
    -Dante
     
    DrDanteIII, May 29, 2007
    #2
New Posts