Take a look here http://www.jeep4x4center.com/cj5/rollbars.htm
http://www.manheimgold.com/ or NADA.com You might try these
3M makes a cloth electrical tape. Its color is white. The exact name is 3M, 27 glass cloth electrical tape. You can get it online, or try a...
Well since you’re in the MIG mod mode. You might also want to add a delay on arc strike. This is done on the big machines. You pull the trigger...
I bought both sides for a 231 for $110 +sh, because after I cleaned up the engine area I noticed a hairline crack in the driver’s side also.
Have you checked your U bolts? Make sure they are tight and that the nut is not bottomed out on the threads. Also check for broken springs.
BSW, The wear part (bushing or bearing) would either be on the shaft that is pictured or in the arm that you removed the shaft from take a look...
Thanks Guys, Now to see if I can get the guy to come down on his price. What's a good price on an donor 81 cj5. Condition appears to be good....
I'm rounding up parts for my 71 cj. I'm planning on a steering conversion and swing pedals. Can I use the parts off an 81 cj 5 for this?
To many varibles. Do a google search under Truck Freight Quote. Fill out info and they will email you a quote. Last quote I got was for a SM 465...
Get the heat shrink that is made for underwater connections. It has a sealant in it that is heat activated. Its called dual wall polyolefin...
Hey Mcruff, [ATTACH] [ATTACH] Here you go. I checked out your pics. I see you used headers. I was planning on using a 231 manifold. Will...
Hansh, Thank you. At first I was thinking I could use the old column and location. But now I think its time to start looking for a tilt column...
Hi Hansh, Thanks for the pics. So looking a your pic. it appears that you came out higher up on the firewall with the steering column and...
[attach] Ok picture might help. Any recommendations on how to route exhaust pass steering to convert to saginaw unit? Picture shows 225 exhaust...
Sorry Sparky, I’m not keeping the Ross Box. I’m trying to figure out how to clear the steering column and shaft near the firewall once the 231...
Hi Spary, Well I can see how everything would clear in the pictured setup, but on mine the existing ross box is directly under the #5 exhaust...
I'm planning a Saginaw steering conversion for my 71 CJ with Dauntless V6. I have a 231 exhaust manifold being shipped for drivers side. Would...
Hi everyone, Just bought a 71, cj, V6. The passanger side exhaust manifold is cracked. So since the steering needs upgraded in the future I...
Separate names with a comma.