I know it's only a feed hose but the fuel hose will react with the break fluid
no can't use fuel line you must use rubber trans line it is $$$$ but won't react with the brake fluid like fuel hose will
hello how many teeth should be on an f head starter drive//thanks
check the speedo cable see if its tight
thanks to all for the help i will keep a better eye on the adj///art
hello how many miles do you go when the adj goes tight on you //thanks art
it looks military try E-Bay
hello did the search I have a 143 F head did the valve adj 10,000 miles ago.what would make the valve adj go tight from .16 to a tight .10//i...
got mine on e-bay
I have rebuilt a few t-90s I just came across two different length cluster gear spacers one is about 3/16s longer than the other .has anybody come...
love at first bite
Re: new clutch isn't working?! turn the clutch cross shaft around one ear is longer than the other
Re: Where's My VIN? (New VIN Project, Please Help Out) #1.57548-119077 #2.? #3.1955 #4 shackle to the back #5 25 #6yes #7top #8small...
hello can anyone tell me what trans this is for ? it's a main drive gear input shift ///group # 17-02 part# 707892 thanks for any help///art
i think you should use clean oil same type as eng//don't over fill the air filter
i should say i put mine in wrong and the clutch would not release
do you have a cross shaft that is in backwards like my 1955 //i put mine in wrong clutch would not release
thats part of the rear main oil seal
1955 cj5 134 f 20 mpg in town just like the the book said
on my 44 you have to pull off the axle flange with a puller then undo the bolts on the brake backing plate and just pull out the axle
Separate names with a comma.