After I pulled the 401 out of a 79 full size, I replaced it with a 304 from my buddies 360 swap in his CJ. Got the full size running with the 304...
Toying around with swapping in a set of 82 to 86 widetracs in my 75 CJ for several reasons. 1. Instant disk brakes 2. I really like the looks of...
When comparing my 75 CJ-6 to my other late model CJs, it drives like a high speed farm tractor. It had a 258/T-14/dana 20 that I swapped over to a...
ANYONE know where I can get one for a 75 CJ????? All the catologs show 77 up and NONE of the regular local parts places carry them at all. Or any...
1975 CJ-6. All lights worked fine and it was parked for some time. Lights starting acted up just before the engine was pulled and it sat some...
Swapped in 75 CJ 304 into my 75 CJ-6 that had a 258. I also swapped the engine wiring harness as it was configed for the V8. The alt is dead an I...
Someone please.....I got the donor Jeep (75 CJ-5) and the front engine items were off....found out later the water pump was bad and they must have...
I am hoping that someone can tell me if or how the CJ-6 frame and tub changed after 1975 (76 to 81 export). From page 30 on Fosters Story of Jeep...
Swaping in 304 into my CJ-6. I have the t 14 / dana 20 that was in it with the 258 AND the t 15 / dana 20 that came with the donor Jeep. What...
75 CJ-6 with empty 258 engine bay. 75 CJ-5 with donor 304. Will swap over the T15 trans and motor mounts too. 1)I noticed the V8 harness has one...
Searched high and low and it seems that 55 to 71 CJ-6 tubs are no problem, CJ-5 tubs to 1975 are no problem. But try to find a replacement 72 to...
I stole the crank and rods out of my CJ-6 258 to aid in a 4.6 stroker build for my 86. Since I pulled the the engine/trans/tcase as a unit, it has...
Separate names with a comma.