Ah, just found this: From Novak site: If the Model 18 is equipped with Warn overdrive, it must be removed before the transfer case can be...
Alright. It's only been nine months. It got too cold to work outside, and then too hot, and I'm too lazy, but I got the whole thing (tranny,...
I'm trying to disassemble the drivetrain, to have the tranny replaced. in the pic labeled "0008" above, how do you remove the dohicky on the...
Glenn, I think you are right. I didn't notice it until I had taken the pictures, and the reason is because it looks alright. It is an illusion....
Glenn and all. All those complex terms sound Arabic to me. Give me some skinned nuckles and a couple of weeks and I will be caught up with the...
MOP, I may take you up on your old parts. Let me get further along though before I commit. Looking rear to front, I've got a warn overdrive...
Alrighty. Took the lid off the transmission. Attached are some of the obvious things even I could see. Now, to keep things simple I wouldn't...
My jeep was working perfectly. About two months ago, ventured about 40 miles from the house (furthest I've ever dared), driving on jeep trails...
I put 80/140 in mine and they haven't leaked yet. But I did a real fine job on the knuckles. Takes a lot of skill you know!
Hey guys, I would like to remove and replace my headers with exact replacements. I have new headers and gaskets, what is the "be sure to" list...
Headers. HELP! I have a 67 that came with the 225. It is mostly original, including the Ross steering (Eric at Novak said that the Sanderson...
What is a fenderwell header? I need headers or a manifold for my 225. I want dual exhaust, going strait back, and I don't want to sound...
Dauntless 1967 CJ5 I currently have headers and two exhaust pipes that exit at the rear of the jeep. There are holes in the exhaust where the...
Just replaced my MC, and moved the brake light switch from the old to new as well. Bought some speed bleeders for $28 (expensive), and bleed...
Three arm puller works well on my flanged 44. Amazing how hard those stinkers are to get off.
Just talked to Grandpa (I bought it from him) and he is certain it is 12V. I'll go with that. Thanks.
The multimeter say 8.03. There is a data tag on the alternator with nothing obvious on it. It runs will run the lights, but not the engine....
I thought I had a 12V electrical system, but now I'm confused. 1967 Dauntless CJ5 Owners manual says it could 6V or 12V. I hooked up the...
I did set preload prior to putting the seal on. I took it all apart, did it again, and the second time everything feels right. Unfortunately,...
Separate names with a comma.