Hey all. Here's an update on my hanging pedals installation. After many attempts to make the Wilwood pedals work, I got a clutch and brake pedal...
Thanks Warloch. I'll be looking forward to seeing a pattern.
With the pedal positioned as far to the right as possible, the pedal still touches the steering column as it's pushed towards the floor.
Pedal touching steering column. The pedal pad could be ground down a bit on the left side and that would help. It likely won't go that far down...
A view of how the Wilwood brake pedal looks after it has been slightly "clocked" so it doesn't touch the steering column. After all this...
An under-hood view of the edge of my pedal template and how close it is to the firewall hump.
Another under-hood view of the edge of my pedal template and how close it is to the firewall hump.
Thanks for the replies and suggestions. I also agree with Duffer that having the brake on the right side of the column, close to the gas pedal, is...
Pedal_Touching_Column by betty_ford_79 posted Jan 18, 2021 at 12:18 PMPedal_Column_Floor by betty_ford_79 posted Jan 18, 2021 at 12:18...
Hey everyone I'm trying to do a hanging pedal conversion in my 55 cj5 and having all sorts of issues. The clutch isn't really a problem but the...
Thanks for this tip - I'm using this solution for my switch too. I hated that pressure switch and I hate bleeding my brakes.
Do you have the old one? How about using it as a template and making one using some gasket material and a pair of scissors?
Thanks for the prompt reply and the pictures - very helpful. Now to try to make a clamp for the cross-member......
Hi all; I need some help and Id really like to see a couple of pictures. First, does anyone have a picture of the clamp that holds the parking...
Separate names with a comma.