9.5's are gonna be really tight, if you truly have the OEM type mounting bracket, used in a side mount. Don't forget, you need to leave...
Yep, those are original. Guard them with your life. You can get new lenses at NAPA.
The original tail light housings for the 74/75 are NLA. The only source would be WTB ads or a Jeep specific junkyard. I have seen one trailer...
I recently replaced the shoes on my 11" drums, reusing the old drums without having them turned, as they looked ok to my eye. I could not lock...
The other clamp half is a mirror image of the one already on the unit you have. The ones you have should have threaded holes, I use 2 allen heads...
No problem with saving the pics, that is why I posted 'em. The hood graphics is a long and convoluted story, not of much value on this forum, Its...
Here are a few shots of a 75, built in June, purchased new by my wife in July 75. This is as original, only mod being the dual exhaust exiting on...
Yep, located on the firewall behind the parking brake, on the fuse panel. When I replaced mine, I went to NAPA. They had two types. Type 1 was...
+2 pulled out activates the hazards. I also have the original switch on the 75. I would replace both flasher cans. Cheap and easy. If that...
First thing I would do is make sure all grounds are good. This will require that you remove all the light fixtures on all four corners. Thoroughly...
Have any of your kid(s) bicycles or scooters turned up missing recently?
You could always use water. But it really plays havoc with your mileage. R)
From the angled back rake, it appears that you also have a later (very late 75 on up) sport bar. Every sport bar for the short nose jeeps i've...
You're running the Dana 20 TC, so you are out of luck so far as a simple TC gear change goes. AFAIK there are no aftermarket gear corrections...
My plastic line from the tank terminates right about the same place yours does only on the passenger side. I found that green plastic to be tough...
Separate names with a comma.
