LBOGRS- Any chance you making another and selling it?
So I found that detroit diesel work boat blue is kind of close to the right color.[IMG] On the block you can see the original color and the heads...
yes, I am going to drain and replace the oil in there...been sitting a while. then take each one apart and lube and re assemble the engine....
yes, I took it out and filled it with oil, seems to have less spring in the lifter now, like it should move the rocker arm
Anyone have some info on these? The chiltons don't have much on them. One of the valves wasn't moving when the hydrolic lifter moved, the push...
So i recently had my radiator re-cored from Sanford Radiator in Sanford Maine. They guy there said it wasn't from a jeep...he claimed it was from...
my other thought is to find older dana 44 backing plates with the parking brake there, and going that route. I'm going for function ability no...
does anyone know where to find the backing plate? I think my CJ5 had this as the parking brake. I found the drum online, but no backing plate...
Got headman headers P/n: 69420 from georges jeep parts (601)542-0013 [IMG] [IMG]
Thanks for the help, I tried it all and the Pitman arm puller worked, it was a little tricky as the one side of the puller didn't have much to...
So I have the ball joints off the knuckles bu from the bell crank...not coming off, I tried using the ball joint fork tool, but no luck...actually...
Separate names with a comma.
