I have a CJ2A with original engine. I purchased Herm's kit, knowing there were interference issues with the front plate / motor mount. Modified...
Re: Inexpensive Rear Swaybar Sway bars work fine with leaf springs. Think about what it does. If both wheels are going over a bump equally, the...
I replaced the springs on my 2A with a 1" lift kit. Everything fit fine, except the front end was lower than the rear. I called the supplier who...
Herm the Overdrive Guy lists a cable for the FC to act as the shift mechanism for the Warn Overdrive. Has anyone used one of these or seen one?...
I had a warn overdrive behind a C4 Ford automatic. Generally, I left it in overdrive all of the time on the road. Once in a while I would want...
A couple of datapoints for you. I had a free spinning F-Head that I sold about 18 months ago for $125. My assumption was that it would need a...
Wonder if the PTO winch was a dealer installed item so some got the oak 1" spacer if equipped with PTO. Factory provided the 2 - 1/4" steel...
No, I had no problem selling it. And, I certainly would have liked that synchronized 2 - 3 - 4 on the road. The guy who bought it operates a...
My opinion. I owned a CJ2A with T-90 for many years. I was never a rock climber and in most situations I found that 2nd gear in low range worked...
I have successfully used the nut, bolt and washer method - well lubricated and going slow. I did not use an air wrench as I did the first time...
Where can I find the body armor, rear corners, cross piece that runs under the tailgate, and side plates for a CJ3A? I can find corners, but that...
I had a 1964 CJ5 with factory (I think) T-98 and it had wood spacers, and I believe they were oak. The floor was totally rotted out so I don't...
Separate names with a comma.
