I ordered a new PCV Valve from Peter DeBella for my F134. It has a male threaded end and a female threaded end. It looks like the male end goes to...
Guys: Thanks a lot. I figured the PCV must be in line somewhere. The link to the Debella Jeep Parts works great for me. I think I can buy a...
I'm just finishing the rebuild on my F134. I've gone to the fuel pump without the vacuum line for the wiper motor as I'll be running electric...
Howard: Thanks, I never even thought about that. Looks like a narrow belt and a new bracket for my power steering pump and I'll be in business....
My F134 has a double groove crank pulley. What was the inside pulley used for if anything? It has a much smaller groove than the outside one but I...
On an F134 engine does anyone know if there was some sort of O ring or gasket on the distributor to seal between it and the block. My distributor...
Rondog: I'm located in Alberta Canada. We live about an hour south of Calgary (you know, the stampede city) and about 2 hours north off the...
I discovered why my distributor won't index like the service manual describes. I found out that the cam/advance plate in the distributor is...
Thanks guys. I realize that the rotor contact needs to point to a contact (preferably the contact dentoted for number one in the manual but not...
According to the service manual the oil pump needs to be installed so the wide part of the distributor is nearest the top of the engine with the...
Separate names with a comma.