1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Crankshaft pulley/Power Steering Pump

Discussion in 'Early CJ5 and CJ6 Tech' started by Edk, Feb 18, 2006.

  1. Feb 18, 2006
    Edk

    Edk New Member

    Joined:
    Nov 1, 2005
    Messages:
    20
    My F134 has a double groove crank pulley. What was the inside pulley used for if anything? It has a much smaller groove than the outside one but I was thinking of driving a power steering pump with it. I can probably find a narrow belt for the pulley but it is pretty close to the timing cover. I'll fabricate some kind of mount for the pump that mounts to a couple of head bolts. Anybody tried driving a power steering pump this way on an F134? I've seen the article on the engine with an idler pulley and one belt that drives everything on the ouside pulley but I was thinking that 2 belts and no idler might be OK too. Thanks in advance (again)

    Ed Kapala
     
    Edk, Feb 18, 2006
    #1
  2. Feb 18, 2006
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,126
    The parts book shows the inside groove being used by the engine governor-

    [​IMG]

    H.
     
    Howard Eisenhauer, Feb 18, 2006
    #2
  3. Feb 19, 2006
    Edk

    Edk New Member

    Joined:
    Nov 1, 2005
    Messages:
    20
    Howard: Thanks, I never even thought about that. Looks like a narrow belt and a new bracket for my power steering pump and I'll be in business.

    Ed Kapala
     
    Edk, Feb 19, 2006
    #3
New Posts