1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

F134 Distributor Installation Solved

Discussion in 'Early CJ5 and CJ6 Tech' started by Edk, Jan 16, 2006.

  1. Jan 16, 2006
    Edk

    Edk New Member

    Joined:
    Nov 1, 2005
    Messages:
    20
    I discovered why my distributor won't index like the service manual describes. I found out that the cam/advance plate in the distributor is actually mounted 180 degrees out. I was installing new bushings in the distributor housing when the idea came to me - the first one in a long time!!! Anyway this distributor has been apart a few times by the look of it. The points mounting plate was installed 180 degrees out according to the manual and so was the cam. It could obviously be used the way it was but hey, it's always nice to match the way it was put together from the factory. Thanks again for all the help.

    Ed Kapala
     
    Edk, Jan 16, 2006
    #1
  2. Jan 16, 2006
    Rondog

    Rondog just hangin' out

    Parker, CO
    Joined:
    Aug 25, 2005
    Messages:
    2,918
    Where are you located, Ed?
     
    Rondog, Jan 16, 2006
    #2
  3. Jan 16, 2006
    Edk

    Edk New Member

    Joined:
    Nov 1, 2005
    Messages:
    20
    Rondog:
    I'm located in Alberta Canada. We live about an hour south of Calgary (you know, the stampede city) and about 2 hours north off the Montana border.

    Ed
     
    Edk, Jan 16, 2006
    #3
New Posts