1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dana 300 front and rear yokes.

Discussion in 'Intermediate CJ-5/6/7/8' started by '72CJ5, May 13, 2012.

  1. May 13, 2012
    '72CJ5

    '72CJ5 Member

    Modesto,...
    Joined:
    May 12, 2010
    Messages:
    980
    Today I replaced my dana 300's original yokes with new ones with a toyota flange for my drive lines. The originals have the "shroud" attatched to them and the new ones do not. Will this cause any issues? Also, I have both yokes off a dana 300 and the are FREE to a good home. I will also post them in the "for sale" are as well. Thanks again.

    [​IMG]
    [​IMG]
    [​IMG]
     
    '72CJ5, May 13, 2012
    #1
  2. May 13, 2012
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    The shield acts as a slinger to deflect dirt, stones, etc away from the seal. It's better to have it on there but not a necessity.


    Sent from my iPhone using Tapatalk
     
    nickmil, May 13, 2012
    #2
  3. May 13, 2012
    sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    exploring the...
    Joined:
    Feb 21, 2009
    Messages:
    3,888
    watch the tall grass that stuff will tangle up in the yoke and eat the seals easier with out em...
     
    sterlclan, May 13, 2012
    #3
  4. May 14, 2012
    '72CJ5

    '72CJ5 Member

    Modesto,...
    Joined:
    May 12, 2010
    Messages:
    980
    ok thanks. So with that in mind since I wheel in all terrain, I will want to put them on. I cant get the old ones off the dana yokes so do they make them seperate?
     
    '72CJ5, May 14, 2012
    #4
New Posts