1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Tie Rods- bent?

Discussion in 'Early CJ5 and CJ6 Tech' started by Howard Eisenhauer, May 1, 2012.

  1. May 1, 2012
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,143
    I've got two sets of tie rods in the parts pile & on both the RH tube has a very slight, identical, bend at the knuckle end. Are these supposed to be like this or are they both, identically, NFG?

    H.
     
    Howard Eisenhauer, May 1, 2012
    #1
  2. May 1, 2012
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,530
    The tie rod end with the hole is bent but I've never seen a stock tie rod bent (on Early CJ's) that wasn't damaged.
     
    nickmil, May 1, 2012
    #2
New Posts