Clutch master for stock pedal

I'm running stock pedals and a Hyd clutch anyone have pics of there master mock up. Thanks

Also looking for pics of hood hinge mounts from inside of cab. And top of cowl

 

Why pics of hood hinges from inside?


Sent from my iPhone using Tapatalk

 

Cause I lost one side and now have the top(actual hinge) but not sure about brackets

 

IIRC, there are captured nuts inside the cowl that the hood hinges bolt to.
No brackets, just two bolts and done.

 

Are you thinking windshield hinges?

 

W/S hinges are same deal.
Captured nuts inside the cowl.

 

On my 67 one side has bracket with nuts on it and I don't remember what I removed from other but there are no nuts

 

The drivers side has a support bracket but the passenger side doesn't There are welded nuts as part of the cowl regardless. I have two Jeeps without the bracket and both hood hinges thread right into the cowl. I can probably get a pic of the bracket tomorrow as I have a couple loose ones.


Sent from my iPhone using Tapatalk

 

Nick is right on this one, I remember my '69 has the bracket on the driver side that is removeable, and the passenger side has a small steel plate welded to the underside of the cowl with 2 threaded holes in it. I know about this plate because I drilled out the spot welds that hold it on to the cowl so I could move it to adjust the position of the cowl side hood hinge on my '70.

Don

 

Ok I will double check