1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

muncie trans mount???

Discussion in 'Early CJ5 and CJ6 Tech' started by jeepcj, Feb 22, 2012.

  1. Feb 22, 2012
    jeepcj

    jeepcj Member

    cincy, Ohio
    Joined:
    Aug 23, 2009
    Messages:
    601
    I have the trans and T-case out of the jeep, while pulling it out I ripped the trans mount in half, or it was already ripped.. My question is, would this trans mount be the same trans mount as stock cj, or is it a special mount for the muncie swap?? thanks
     
    Last edited: Feb 22, 2012
    jeepcj, Feb 22, 2012
    #1
  2. Feb 22, 2012
    duffer

    duffer Rodent Power

    Bozeman, MT
    Joined:
    Sep 17, 2009
    Messages:
    4,514
    It could be a lot of things, but I use a standard stock GM mount on mine. I will check if I have the part number.
     
    duffer, Feb 22, 2012
    #2
  3. Feb 22, 2012
    jeepcj

    jeepcj Member

    cincy, Ohio
    Joined:
    Aug 23, 2009
    Messages:
    601
    Ok, thanks Duffer. I figured only those running a muncie would know.
     
    jeepcj, Feb 22, 2012
    #3
  4. Feb 22, 2012
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Knowing what Muncie trans you have would be helpful too. Lots of M-series (M-20, M-21, etc.) Muncies have been swapped in. Is this one of those, an SM-420, or an SM-465?
     
    nickmil, Feb 22, 2012
    #4
  5. Feb 22, 2012
    jeepcj

    jeepcj Member

    cincy, Ohio
    Joined:
    Aug 23, 2009
    Messages:
    601
    Sorry about that, guess it would help. It's a 68-M21 car 4-spd.
     
    Last edited: Feb 22, 2012
    jeepcj, Feb 22, 2012
    #5
New Posts